Brochure-HDPE-Fittings-2021 - Page 23

Butt Fusion IPS 45 ° Elbows

SDR 7 ( STANDARD DIMENSION RATIO ) 335 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FM Pressure Rating ( psi .)
FF-51.110.0002.07 2 ” IPS 8.28 4.2 2.40 0.339 2.38 335 FF-51.110.0003.07 3 ” IPS 10.15 5.00 2.50 0.500 3.50 335 FF-51.110.0004.07 4 ” IPS 10.70 5.07 2.80 0.643 4.50 335 FF-51.110.0006.07 6 ” IPS 16.27 8.13 4.00 0.946 6.63 335 FF-51.110.0008.07 8 ” IPS 16.97 7.90 4.80 1.232 8.63 - FF-51.110.0010.07 10 ” IPS 20.28 9.10 5.60 1.536 10.75 - FF-51.110.0012.07 12 ” IPS 21.93 10.12 5.98 1.821 12.75 -
• Molded from black PE 100 / 4710 resin & NSF-61 certified
• Complies with the following product standards : ASTM D2513 , D3261 , D3350 , and AWWA C906
• Made in the USA
SDR 9 ( STANDARD DIMENSION RATIO ) 250 PSI ( WORKING PRESSURE AS 73.4 ° F )
Product Code
Nominal Diameter ( inch )
L1 ( inch )
L2 ( inch )
L3 ( inch ) s ( inch ) Min Wall
OD ( inch )
FM Pressure Rating ( psi .)
FF-51.110.0002.09 2 ” IPS 8.28 4.20 2.40 0.264 2.38 250 FF-51.110.0003.09 3 ” IPS 10.15 5.00 2.50 0.389 3.50 250 FF-51.110.0004.09 4 ” IPS 10.70 5.07 2.80 0.500 4.50 250 FF-51.110.0006.09 6 ” IPS 16.27 8.13 4.00 0.736 6.63 250 FF-51.110.0008.09 8 ” IPS 16.97 7.90 4.80 0.958 8.63 - FF-51.110.0010.09 10 ” IPS 20.28 9.10 5.60 1.194 10.75 - FF-51.110.0012.09 12 ” IPS 21.93 10.12 5.98 1.417 12.75 -
Notes : 1 . All dimensions shown are nominal and subject to manufacturing tolerance . OD and minimum wall are determined in accordance with ASTM standards . Drawing shown is an approximation only . 2 . The maximum pressure for gas applications should be calculated based on the applicable local and federal regulations . 3 . Fittings are marked to meet the applicable standards . 4 . Only fittings with a FM pressure rating are FM approved .
• FM Approval Class 1613
23