TOTE
CONTAINER HEATERS
TOTE Wrap-Around Tote Tank / IBC Heater continued
Specifications :
• Full coverage plug-and-play system
• Fits any tote tank from 40 in x 40 in ( 1016 mm x 1016 mm ) to 48 in x 48 in ( 1219 mm x 1219 mm )
• Three standard height sizes : 36 in ( 914 mm ), 42 in ( 1067 mm ), 48 in ( 1220 mm )
• Two separate heat zones ( top and bottom )
• Adjustable thermostat : Up to 160 ° F ( 71 ° C )
• Built-in manual reset high-limit safety thermostat set at 195 ° F ( 91 ° C ) for each heat zone
• Attachment method : adjustable nylon straps with buckles ( Two across the top and three around the tank )
Your Heating Specialist since 1949
• Silicone impregnated cloth outer and inner material
• 1 / 4 in ( 6 mm ) fiberglass insulation
• inMouse hole in designed for spigot access
• Patented ground for your safety
• 120 / 240VAC , single-phase
• Total wattage : 120VAC = 1440 watts 240VAC = 2880 watts
• Power cord 6-foot ( 1.8m ) long 120VAC standard 3-prong plug ( NEMA 5-15 ) 240VAC standard 3-prong plug ( NEMA 6-15 )
• Optional insulated top cover reduces heat loss and accelerates heat-up .
• Ingress Protection Rating : IP20
How to Measure Your Tote Tank / IBC :
1 . Measure the height of the tote tank / IBC ( Not including the pallet or support stand ).
2 . Measure the length and width of the tank . This determines the tank perimeter for the heated area . x 2 + x 2 =
Tank Length Tank Width
Tank Perimeter Note : If tank perimeter measurement is below 160 in ( 4064 mm ) or above 192 in ( 4877 mm ), contact factory for heater reco mmendation .
Ordering Information :
Height
Tank Perimeter Minimum
Tank Perimeter Maximum
Total Wattage 120V / 240V
Weight
Part Number 120VAC
Part Number 240VAC
36 in ( 914 mm ) 160 in ( 4064 mm ) 192 in ( 4877 mm ) 1440 / 2880 34 lbs ( 15 kg ) TOTE361-ADJ TOTE362-ADJ 42 in ( 1067 mm ) 160 in ( 4064 mm ) 192 in ( 4877 mm ) 1440 / 2880 40 lbs ( 18 kg ) TOTE421-ADJ TOTE422-ADJ 48 in ( 1220 mm ) 160 in ( 4064 mm ) 192 in ( 4877 mm ) 1440 / 2880 46 lbs ( 21 kg ) TOTE481-ADJ TOTE482-ADJ
Ordering Options : European Lead Wire Option ( 240V Only ): Add a in-CVE in at the end of the part number for crimped wire ferrule terminated leads .
RECO mmENDED : 240VAC model and top insulator is strongly reco mmended for applications that involve faster heat-up and melting due to the higher wattage requirements .
Accessories :
Part Number
Description TOTE-TOP Insulated top cover , minimizes heat loss . TOTE-TOPF Insulated top cover with flap opening , minimizes heat loss .
Custom Sizes and Designs Available : Contact your local distributor or BriskHeat ® for more information .
74
Toll Free : 800-848-7673 Phone : 614-294-3376 w w w . BriskHeat . c o m Email : bhtsales1 @ briskheat . com Fax : 614-294-3807 © BriskHeat Corporation . All Rights Reserved . 19-10