CONNECTION / TERMINATION KITS
SLCBL Connection / Termination Kits
Your Heating Specialist since 1949
For use in ordinary locations with SLCBL cable only ( UL approved ). For use in roof & gutter snow melting & de-icing applications with SLCBL cable only ( UL approved ).
Ordinary Locations
Approvals valid only when used with appropriate heating cable and installation accessories , and installed in accordance with all applicable instructions , codes , and regulations .
CABLE / WIRE
SLCBLUC : SLCBL Power Connection Kit Kit Contents : 2 Heat-trace warning labels 2 De-icing snow melt caution labels 1 Standoff pipe mounting bracket 1 Lock nut 1 1 / 2 ” NPT Seal fitting with strain relief and grommet 3 Wire nuts
1 Black heat-shrink tube 1 / 2 ” x 1 ” ( 13mm x 25mm ) 1 Green / Yellow heat-shrink tube 1 / 4 ” x 6 ” ( 6mm x 15cm )
2 Black heat-shrink tubes
1 / 8 ” x 5-1 / 2 ” ( 3mm x 14cm ) 1 Sealing gasket 1 End seal
Enough to complete : One input power connection and one end seal termination . NOTE : Junction box and pipe strap sold seperately . Requires UL Listed junction box suitable for the location with a clearance hole for 1 / 2 ” conduit or 1 / 2 ” NPT thread hub . For heating cable with no outer-jacket ( Type -B only ), a metallic junction box must be used to ensure proper grounding .
SLCBLUC-GF : Ground Fault Power Connection Kit Kit Contents : 2 Heat-trace warning labels 2 De-icing snow melt caution labels 1 Cloth tape 2 Mastic strips 2 Clamp ties 2 Crimp-on insulated terminals 1 Crimp-on non-insulated barrel 1 Heat-shrink tube
3 / 4 ” x 8 ” ( 19mm x 20cm )
1 Heat-shrink tube 3 / 4 ” x 5 ” ( 19mm x 13cm )
2 Heat-shrink tubes 1 / 8 ” x 1 ” ( 3mm x 25mm )
1 Heat-shrink tube 1 / 2 ” x 1 ” ( 13mm x 25mm )
1 Heat-shrink tube 5 / 16 ” x 1-1 / 2 ” ( 8mm x 38mm )
1 Ground fault device with 120V 3-Prong NEMA 5-15 plug
Enough to complete : One ground-fault protection power input power connection .
SLCBLKC : SLCBL End Seal Kit Kit Contents : 2 Heat-shrink caps 2 Heat-shrink tubes 3 / 4 ” x 5 ”
( 19mm x 13cm )
Enough to complete : Two end seal terminations .
2 Woven braid sleeves 1 / 2 ” x 4 ” ( 13mm x 10cm )
SLCBLSK : SLCBL Splice and Tee Kit Kit Contents : 1 Clamp tie 3 Cable ties 1 Cloth tape 5 Mastic strips 2 Heat-shrink caps
1 Black heat-shrink tube 1 ” x 8 ” ( 25mm x 20cm )
3 Black heat-shrink tubes 1 / 2 ” x 1 ” ( 13mm x 25mm )
6 Black heat-shrink tubes 1 / 8 ” x 1 ” ( 3mm x 25mm )
1 Heat-shrink tube 2 Crimp-on insulated terminals 1 Crimp-on non-insulated barrel 1 End seal
Enough to complete : One splice connection and one end seal termination or one tee connection and one end seal termination . NOTE : This kit does not complete an input power connection .
Toll Free : 800-848-7673 Phone : 614-294-3376 w w w . BriskHeat . c o m Email : bhtsales1 @ briskheat . com Fax : 614-294-3807
10
© BriskHeat Corporation . All Rights Reserved . 18-02