Bissell CleanView Lift-off Vol1 | Page 9

Operations Upright cleaning mode continued Cleaning continued CAUTION:not Do not overwet. Take care 3. Release the spray trigger and make one slow forward and backward pass over the same area. Repeated passes will help aid in dry time. 4. Continue passes until cleaning area is complete. Note: Your machine may be equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug yo ur machine, remove the foreign object, and then plug the machine back in to reset the circuit breaker. Empty dirty tank 1. When the dirty tank reaches the “FULL” line on the tank it is time to empty. 2. Remove dirty tank and carry to a utility sink, toilet or outside (where you will dispose of the dirty water). to run over loose objects or edges of area rugs. Stalling brush may result in premature belt failure. Tip: Make only one trip to the sink by removing the entire portable cleaner. Fill and empty in the same trip. 3. 2. 4. 3. To unlock the dirty tank lid, rotate handle over the back of the tank. Remove lid and pour out dirty water. Rinse out dirty tank to remove any debris. 4. Replace top of tank, and rotate the handle forward to lock in place on front of tank. Cleaning your machine 1. Flush out machine of any remaining residual solution. Fill the formula & water tank with hand hot tap water and turn on your machine. Recline handle and press the spray trigger for about 15 seconds while making forward and backward passes on carpet. Continue without pressing the spray trigger until there is no more water being suctioned up. Turn off the machine and wrap the power cord. Make sure the dirty tank and the formula & water tank are emptied, rinsed, and dried before the next use. Before you replace tank, clean all debris from red filter screen. w w w. b i s s e l l . c o m WARNING: To reduce the risk of fire, electric shock, or injury, turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting. Tip: For best results empty, rinse and dry both tanks before storing. 9