Troubleshooting
Built-in heater ready light does not illuminate
Possible causes
1. The power is not turned ON
Remedies
1. The power must be ON to activate the heater ready light
2. The portable spot cleaner is not attached completely
2. Make sure the portable spot cleaner is attached
Push down firmly to check
Reduced Spray or No Spray
Possible causes
Remedies
1. Formula & water tank may be empty
1. Refill tank
2. Formula & water tank may not be seated completely
2. Turn power OFF. Remove and reseat tank
3. Pump may have lost prime in portable spot cleaning mode
3. Hold end of hose below water level in tank to prime
4. The portable spot cleaner is not attached completely
4. Push down firmly to check connection
5. Solution filter may be clogged
5. Follow steps under cleaning filter on page 13
DirtLifter™ PowerBrush does not turn
Possible causes
Remedies
1. The portable spot cleaner is not attached completely
1. Make sure the portable spot cleaner is attached.
Push down firmly to check
2. The unit is in the upright position
2. Brushes only rotate when unit is reclined using the
recline pedal
3. Circuit breaker on machine (if equipped) may have tripped
3. Turn the machine OFF and unplug from outlet. Check
to see if foreign object is caught in brush &