Maintenance and care
Machine care (check regularly)
WARNING:
To reduce the risk of fire, elec-
Cleaning suction gate
The suction gate automatically diverts
air when the portable deep cleaner
is detached. This should be checked
and cleaned regularly for any dirt and
debris.
tric shock, or injury, turn power
OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1. Step on the pedal and remove the
portable spot cleaner. Remove dirty
tank.
2.
2. Remove two screws and pull off
suction gate door.
3. Wipe suction gate clean and rinse
suction gate door.
4. Replace suction gate door and two
screws.
Suction
Gate
Cleaning spray tips
1. Step on the pedal and remove the
portable spot cleaner. To remove, push
in tab and pull it out.
Spray
Tips
2. Clean by rinsing under water.
3. Replace by snapping back in.
1.
4. Repeat steps on second spray tip.
Cleaning solution filter
1. Step on the pedal and remove the
portable spot cleaner. Remove the red
solution filter cap on the base of the
machine by inserting a coin or a flat
head screw driver into the slot on the
top.
2. Turn counter clockwise to unscrew. Set
aside.
3. Remove the white filter by the post.
Rinse the filter under water.
4. Replace the white filter back into the
filter area.
2.
Solution
Filter Cap
3.
Note: Make sure the white filter
is seated properly before replacing the red solution filter cap.
5. Replace the red solution filter cap and
turn clockwise to tighten.
5.
Filter
w w w. b i s s e l l . c o m
13