Benefits of sleep sleep studies and the productivity and health benef Build your own shed | Page 19

1. Cut and install the 2 × 6 subfascia along the eaves (see the EAVE
DETAIL). Keep the ends flush with the outsides of the overhang
rafters, and the bottom edges flush with the bottom rafter edges;
use 16d nails.
2. Install the 1 × 8 fascia along the gable overhangs, then along the
eaves, holding it 1/2" above the rafters so it will be flush with the
sheathing; use 6d galv. finish nails.
3. Install the 1/2" plywood sheathing, starting at a lower corner of
the roof; use 8d box nails driven every 6" along the edges and
every 12" in the field of the sheets.
4. Attach metal drip edge along the eaves, then apply 15# building
paper over the sheathing. Add dripedge along the gable ends, over
the paper.
5. Install the asphalt shingles, starting at the eave edge. If desired,
install roof vents.
Install the plywood roof sheathing after installing the fascia. Nail
every 6" at the edges and every 12" in the field.
Rip the soffit panels to fit between the wall plates and fascia. Fasten
the panels to the nailers, rafters, and subfascia.