When purchasing studio gear it is wise to research only what is absolutely essential for your style of music. If you’re not recording live drums in your studio, there is no need to buy a plethora of microphones for them. By being patient and shopping around for the best prices, a mass amount of money can be saved in the end. When you save $ 50 to $ 100 bucks on each piece of gear it really adds up in the end, and there is a ton of gear needed to put a proper studio together.
Below is a basic studio checklist that will be discussed in further detail in later articles. These are the essentials of modern day recordings and the tools that are most commonly used in the best studios around the world.
The engineer or producer operates the console that controls all of the levels for recording, playback and mixing.
This is the big board that has all the buttons, switches, knobs, faders which control the levels and signal routing for each instrument. This could be referred to as a board, console or mixer. The most common consoles in major studios are SSL (Solid State Logic) or Neve. The console is the most important piece of gear in the studio. It controls the overall operations of signal flow and sound manipulation. The console allows for each instrument to be on its own channel on the board. Each channel may then have effects inserted into its signal path to enhance the sound. A signal may also be routed to external gear for further manipulation. Anything that can be imagined, can be done. There are no rules for experimenting with sound. A signal can be sent to reverbs, delays, compressors, guitar amps, speakers in hallways for re-recording
Each channel strip on a decent console will contain: Faders, Preamps, Panning, Equalization, Filters, a Routing Matrix, AUX Sends and Returns, Dynamics, Muting, & Solo.
Other Features Of The Console: Inserts, Outputs, Monitoring, Automation, Fader Grouping, Bussing, Splitting, Allows the studio to combine interconnectivity with all the equipment by using patch cables. The patchbay can be configured for each studio’s specific equipment requirements. All of the outboard gear, console and recording devices inputs and outputs are hard wired to the patchbay. The Patchbays can be be analog or digital. The most common is the bantam TT cable configurations.
Check List Part 2:
Microphones Microphones pickup the initial sound source. The mic is the first source in the recording process receiving and converting the sound wave into electrical energy to be amplified, transmitted and recorded.