Australian Water Management Review Vol. 1 2014 | Page 157
tAMWorth CitY WAsteWAter
reuse proJeCt CAse studY
lindsay PivoTs and PumPs Provide for CiTy’s wasTewaTer needs
Summary
Solution
How do you successfully complete one of
the largest wastewater treatment projects
of its kind in Australia?
The Tamworth City wastewater reuse project was 14
years in the making and designed to secure the city’s
effluent disposal for up to 40 years.
With a full arsenal of Lindsay products,
including pivots, pumps and remote telemetry.
TEAM Irrigation, Lindsay’s local Zimmatic dealer in
Dubbo, NSW, Australia, spearheaded the project,
which took approximately 12 months to complete.
With the city’s population expected
to grow to nearly 50,000 by 2020, the
Tamworth, Australia, City Council decided
to decommission and relocate its two
existing wastewater treatment plants to the
outskirts of town.
Today, instead of being dumped into
the nearby Peel River, the town’s treated
wastewater is pumped through Zimmatic®
pivots and used to irrigate local crops, which
then are sold to local dairies and feedlots.
“We were proud to be involved in the project from
conception,” says Craig Chandler, managing director of
TEAM Irrigation. “This multi-million-dollar project was
unique in that it involved numerous Lindsay products,
including the pivots, pumps and all of the controls.”
It was a team effort involving Realm Agribusiness,
which served as the principal contractor on the
project, and manages the irrigation system and
farming operation.
ZIMMATIC PIVOTS
The town’s treated water is pumped through 13 new
Zimmatic center pivots, ranging in length from 1,772
feet (540 m) to 778 feet (237 m). They are designed
to apply .36 inches (9 mm) of water over the fields
in a 24-hour period.
Watertronics Pump Station
Key to the innovative wastewater treatment project
is a fully-integrated Lindsay Watertronics® pump
station that is used to move the effluent from holding
ponds through the Zimmatic pivots and ultimately
onto 1,581 acres (640 ha) of grain and alfalfa crops.
According to John Atkinson, Watertronics agricultural
sales manager, the Tamworth pumping station
consists of five 215 horsepower (160 kw) centrifugal
pumps, each capable of pumping 2,400 gallons
(9,085 liters) per minute. The pumps are equipped
with variable frequency drives (VFDs) to specifically
tune pressure and flow characteristics to each pump,
ensuring near perfect pressure regulation.
The Tamworth wastewater treatment system allows for
a maximum daily effluent discharge of 14.2 million
gallons (54 ML).
It irrigates 1,581 acres (640 ha) of local crops such
as grain and alfalfa, which are then sold locally.
FULLY TESTED AND READY TO PUMP
Watertronics® offers integrated pump systems and controls
that help maintain consistent, surge-free water delivery for
optimum pressure regulation.
For more information, contact Richard Hall
•
•
•
•
•
433 Logan Road, Stones Corner, Queensland 4120
Delivered as a factory-assembled unit for fast installation
Collaboration with engineering firms
24-hour certified service and support
Full inventory of parts for minimal downtime
Pre-tested at the factory for smooth operation
+61 7 3394 8254 • [email protected]
© 2014 Lindsay. All rights reserved. Zimmatic and Watertronics are trademarks or registered trademarks of the Lindsay Corporation.
AustrAliAn wat e r m a n a g e m e nt r e vie w 151