Maintenance and care
Switching the appliance off Assistance
Disconnect your appliance from the electricity supply
before carrying out any work on it. ! Never use the services of an unauthorised
technician.
Cleaning the appliance
! Do not use abrasive or corrosive detergents, stain
removers, anti-rust products, powder detergents or
sponges with abrasive surfaces: these may scratch
the surface.
GB
Please have the following information to hand:
• The type of problem encountered.
• The appliance model (Mod.).
• The serial number (S/N).
This information can be found on the data plate
located on the appliance and/or on the packaging.
Technical characteristic
! Never use steam cleaners or pressure cleaners on
the appliance.
• It is usually enough to wash the hob with a damp
sponge and dry it with absorbent kitchen roll.
• The electric hobs should be cleaned using a damp
cloth and then rubbed with oil while still warm.
• Stainless steel may become marked if it comes into
contact with very hard water or harsh detergents
(containing phosphorous) for long periods of time.
After cleaning, it is advisable to rinse thoroughly
and dry. It is also recommended that drops of water
be dried.
DATA PLATE
Electrical section
voltage: 220-230V/380-400V 3N ~
50/60Hz
Max power 5600 W
This appliance conforms to the
following European Economic
Community directives:
- 2006/95/EEC of 12/12/06 (Low
Voltage) and subsequent
amendments;
- 2004/108/EEC of 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments;
- 93/68/EEC of 22/07/93 and
subsequent amendments.
- 2002/96/EC and subsequent
amendments.
7