SHELVES, BINS AND DRAWERS
Shelves and Shelf Frames
Shelf Height Adjustment
Shelf height can be adjusted by changing its location from bottom
support to upper support and vice versa
■ ■ Open right side door to its full opening.
■ ■ Open left side door to its full opening and then lift door to
open 180°.
The shelves in your refrigerator are adjustable to meet your
individual storage needs.
Storing similar food items together in your refrigerator and
adjusting the shelves to fit different heights of items will make
finding the exact item you want easier. It will also reduce the
amount of time the refrigerator door is open and save energy.
To remove and replace shelves:
1. Open right side door to its full opening and left side door to its
full opening and lift left door to open 180°.
2. Remove the middle shelf or top shelf by lifting it up and out
of shelf supports. Then pull the shelf forward and tilt down
to a vertical position. Turn shelf at an angle and pull out of
refrigerator.
3. Remove the bottom shelf by lifting it up and out of shelf
supports. Then pull shelf forward and tilt up to a vertical
position. Turn shelf at an angle and pull out of refrigerator.
4. Replace middle and top shelves by putting shelf in refrigerator
at an angle with shelf front down. Lift front of shelf up and
slide in until rear of shelf drops into shelf supports. Lower
front of shelf and make sure that shelf is in position.
5. Replace bottom shelf by putting the shelf in refrigerator at an
angle with shelf up. Lift front of shelf down and slide in until
rear shelf drops into shelf supports. Lower front of shelf and
make sure that shelf is in position.
Crispers
180°
■ ■
130°
Take shelf out of refrigerator and place it to desired mounting
position.
Crisper
To remove and replace the Crispers:
1. Grasp handle of the Crisper and slide the Crisper straight out
to the stop. Lift the Crisper off the bottom guide.
2. Replace/putting back the Crisper by placing it on the bottom
Crisper guide and pushing it past the Crisper stop into
position.
■ ■
18
Ensure shelf is properly seated on shelf mounts.