EDITORS CHOICE
For reinforced concrete walls
There are three Sconnex product variations , the type W , type P and type M . At Wickside it is the Sconnex type W and type P that are incorporated . The type W thermal insulation element for reinforced concrete walls transmits very high compressive , tensile and shear forces in the walls ’ longitudinal and transverse directions . The structural engineer can optimally control the load transmission by adjusting the spacing of individual elements and selecting the appropriate variant type . The insulating element is made of Neopor and the compression block is microfibre reinforced high-performance concrete . In addition to its very high compressive and flexural strength , the addition of steel fibres also results in excellent postcracking behaviour .
Eliminates the need for flanking insulation
The Sconnex type P consists of a thermal insulation element and a reinforcement element , both of which are required to withstand the bearing load . The thermal insulation element has a pressure-resistant support structure , made of lightweight concrete and polypropylene fibres , all in a 100mm thick insulation layer . Its performance significantly reduces heat flow , but importantly , also eliminates the need the for the traditional solution of using cumbersome flanking insulation . Glass fibre reinforcement rods are made from Schöck Combar and these additionally reduce the heat flow .
A graphic of the type P in position
A safety-first approach to thermal challenges
In light of the Building Safety Act , which prioritises stringent safety and performance standards for highrise and multi-occupancy buildings , the inclusion of the Schöck Sconnex products demonstrates a proactive commitment to safety and energy efficiency . This Act emphasises the importance of robust construction methods and materials that mitigate risks , particularly in structurally sensitive areas like the exposed concrete columns used at Wickside .
The Schöck Sconnex products address both safety and sustainability by reducing structural thermal bridging — a critical area of focus in ensuring the longevity and integrity of modern building designs . By enhancing thermal performance and meeting rigorous safety standards , these solutions align with the Act ’ s goals of delivering high-quality , energy-efficient , and safe buildings .
More solutions than any other manufacturer in Europe
The Sconnex type W and the Sconnex type P installed at Wickside are fully certified by the Passive House Institute in Germany . With the Sconnex type P being the only column connection certified by the Institute . Sconnex is of course only a part of the Schöck range of thermal break products , as the company offers hundreds of solutions .
These include the market leading Schöck Isokorb range , which in the UK enables projects to meet full compliance with the necessary Building Regulations ( and the impending Future Homes Standard criteria where relevant ). There is also the security of independent BBA Certification , which provides NHBC approval .
Sconnex type P on-site
For full details of the Sconnex range contact Schöck on 01865 290 890 ; or go to :
www . schoeck . com / en-gb / sconnex
PAGE 11 - ARCHETECH