Levato Mono porcelain paver system has recently
been installed on the new roof terrace at Bristol
Airport East Terminal extension.
Circa 400m2 of the system was
specified in order to conquer a
number of challenges; covering EPDM
membrane laid with multiple falls; to
hide services and drainage gulleys
but still have accessibility for future
maintenance; cutting around the
numerous stainless steel posts and
glazed partition with accuracy for the
shroud detail.
The finish the Architect specified was
Teknotimber Dark oak – offering the
Client an attractive, flexible and well
designed raised flooring solution and
with incredible technical properties;
R11 slip rating; lightweight at just
45kgs per m2; Non porous surface and
1000kgs loading per 600x600x20mm
paver to name but a few of the benefits.
Our Self-levelling head / height
adjustable pedestals were used on this
project to facilitate a speedy installation
and enabling the installers to adjust the
pedestal heights to millimetre accuracy,
thus creating a perfectly level deck.
Available in 40+ colours and finishes
in both ultra-realistic timber and stone
effect, by combining 3D printing
and mould making technology to
reproduce identical copies of natural
materials and with up to 30 prints
available for each paver range. Once
laid, the eye is unable to discern any
replicated pattern allowing for a
completely natural looking surface.
Recently specified for external
dining areas at London Zoo, LIDL HQ
Northfleet and the new Portico Terrace
at Theatre Royal Drury Lane - where
Levato Mono sandstone effect paver
ranges were considered so similar to
natural sandstone material that is was
sanctioned for use on a Grade I listed
building by English Heritage.
Used in conjunction with height
adjustable fixed head or self- levelling
pedestals or fixed height paver support
pads, the Levato Mono system makes
it possible to create perfectly level
surfaces over uneven sub-surfaces.
Ideal for installation over all waterproof
membranes our support systems cover
height ranges from 9mm to 550mm
and incorporate a patented selflevelling slope correction facility with
the convenience of height adjustment
after the pavers are installed.
Levato Mono porcelain paver system benefits at a
glance…
•
.‘Floating floor’ – installation over single ply
membranes.
•
.Eternal product - zero maintenance required,
offering massive over-life savings.
•
.Highly abrasion and stain resistant.
•
.Highly slip resistant; R11 and achieved up to +65
wet in the BS pendulum test.
•
.Lightweight – 45kgs per m2.
•
.High load bearing and impact resistance.
•
.Timber & stone effects; 40+ finishes available.
•
.Ideal for balconies, roof terraces and piazzas, for
both commercial and residential use.
•
.Completely non porous.
•
.Fire & frost proof.
•
.Height adjustable supports to raise surface from
9mm up to 550mm.
LEVATO MONO
porcelain paver system
The Levato Mono porcelain paver system is the pinnacle
of external raised flooring technology; enabling the
specification of lightweight, slip resistant and attractive
raised flooring solutions, combining incredible technical
properties with uncompromising aesthetics; making them
the ideal choice for commercial and domestic use alike.
• 20mm porcelain pavers 40x80 45x90 60x60
75x75 30x120 40x120 60x120
• ‘Floating floor’ – installation over single ply
membranes
• Eternal product - zero maintenance required –
offering massive over-life savings
• Highly abrasion and stain resistant
• Highly slip resistant ; R11 and achieved
up to +65 wet in the BS pendulum test
• Lightweight – 45kgs per m2
• High load bearing and impact resistance
• Timber & stone effects ; 40+ finishes available
• Completely non porous
• Fire & frost proof
t: 0845 2700 696 e: [email protected]
www.thedecktileco.co.uk
• Height-adjustable support from 9mm
up to 550mm
Page 67 - Archetech
• Ideal for balconies, roof terraces and piazzas,
for both commercial & residential use