Application Book: Heating Solutions for All Industries | Page 57
FREEZE PROTECTION
FREEZE PROTECTION FOR PIPES
A simple and easy way to protect pipe systems from freezing
Application
Pipe systems designed to transport water or other liquids are often exposed
to cold weather. They may be directly exposed to outdoor conditions, or
may be in an unheated area of a building. If the ambient conditions are cold
enough, the contents of the pipes may thicken and resist flow (viscosity) or
even worse they may freeze and expand causing pipes to burst. The damage,
repair cost, and downtime can be extensive and costly.
Solutions
Self-Regulating heating cable is the perfect solution to protect pipes from
freezing. The cable is semi-flexible and can be straight-traced or spiral-
wrapped around pipe for long runs or long lengths on a single circuit. Self-
regulating cable is specifically designed for freeze protection because the
temperature never rises to a level that would damage pipes or a heated system.
It will automatically adjust its heat output based upon ambient conditions and
never exceed a specific rated temperature, most commonly 150°F (65°C).
Higher temperature self-regulating heating cable can reach 250°F (120°C).
Self-regulating cable is grounded for safe worry-free operation. A protective
outer shell resists moisture and chemicals for worry-free use in outdoor and
wash-down environments.
Another solution is BriskHeat’s RKP silicone tapes with built-in thermostats.
They are super flexible, plug-and-play, and suitable for outdoor use.
To improve thermal efficiency, the cable is insulated with BriskHeat’s Insul-
Lock ® DS flexible closed-cell foam pipe insulation. The insulation is offered in
a variety of diameters to fit any pipe and tube size up to 4 in (100 mm). It is
suitable for outdoor use and has an R-value of 3.0 to keep the heat on the pipe
even in extreme cold conditions. Insul-Lock ® DS is easy to install and the peel-
and-stick flap ensures the insulation remains installed for extended service
periods.
TB250N
Additional Uses
Self-regulating heating cable is used to protect large tanks, vessels,
and even small household pipes from freezing conditions. Pre-
terminated SpeedTrace self-regulating heating cable is available for
fast, easy, and convenient plug-and-play installations. Available in up
to 150 ft (45.7 m) lengths.
RKP
Types of Users
Industries
Adhesives
Aerospace
Agriculture
Biodiesel
Concrete/Asphalt
Food Processing
General Manufacturing
Heavy Industry
Home & Office
HVAC
Oil & Gas
Petrochemical/Chemical
Processing
Power Generation
Pulp & Paper
Waste Water Treatment
Facilities Maintenance
Personnel
Process Engineers
Production Managers
Toll Free: 800-848-7673 | Phone: 614-294-3376 | BriskHeat.com | Email: [email protected] | Fax: 614-294-3807
© BriskHeat Corporation. All Rights Reserved. 20-01
53