Application Book: Heating Solutions for All Industries | Page 31
PROCESS CONTROL
HEATED HOSES FOR SPRAY FOAM INSULATION
An efficient cost effective way to heat spray foam hoses
Application
Spray foam is a popular insulation alternative to traditional fiberglass materials. It is a
two-component mixture (isocyanate and resin) that is typically stored in cylinders or small
barrels. The liquid materials must first pass through two separate hoses that come together
into an applicator gun that mixes the materials to form an expanding foam spray. Typically,
these components flow best at temperatures above 70°F (21°C). If the components get
too cold, they become difficult to extract and they don’t flow well through the hose and the
applicator gun. This can result in slow production time or even clogs and damage within the
system that can cause significant downtime.
Solution
Heat the hose with XtremeFLEX ® RKP silicone rubber heating tape. This super flexible
heating tape is designed with a built-in pre-set thermostat that maintains heat output
at 70°F (21°C). The supplemental heat ensures an optimum operating temperature is
provided to assist spray foam components as they travel through delivery hoses and into an
applicator gun. The RKP heating tape has a low watt-density of 6 W/ft (20 W/m) to provide
safe operation and avoid overheating the chemicals. Standard lengths are available from
10 ft to 200 ft (3 m to 61 m) to meet your needs. If necessary, higher temperature, higher
watt-density and custom length options are available. For added protection and efficiency,
wrap the hose and heater assembly with an insulated abrasion resistant cover. This solution
eliminates downtime and extends the service life of your spray foam equipment.
Protect the cylinder or barrel with a BriskHeat DHLS Drum Heater. The DHLS drum heater is
adjustable up to 160°F (71°C). Both heating solutions are easily installed and “plug-and-
play” ready, allowing the warmers to be plugged into a standard electrical source without
special wiring.
Additional Uses
BriskHeat’s RKP long-length silicone rubber heating tapes with built-in pre-set thermostats can
also be used for freeze protection on complex winding or difficult-to-install pipe applications, or
on objects that have unique shapes and sizes. Custom RKP heating tapes are available.
Industries
Insulation Manufacturers
Insulation Contractors
Foam Delivery System Manufacturers
Aviation/Aerospace
Construction
General Manufacturing
Marine
Types of Users
Production Manager
Design Engineer
Project Manager
General Contractor
Commercial Roofing Contractor
Toll Free: 800-848-7673 | Phone: 614-294-3376 | BriskHeat.com | Email: [email protected] | Fax: 614-294-3807
© BriskHeat Corporation. All Rights Reserved. 20-01
27