American Motorcycle Dealer AMD 241 August 2019 | Page 55

Biltwell "Problem Solvers" New in what Californian parts-to-G&A specialist Biltwell describes as its "Problem Solver" series, this new billet dash panel provides a home for the digital module on 2018 and up M-8 Softail models such as the Street Bob and Super Glide. CNC machined from T-6 aluminum, the included reducer shims allow use on 1" or 1.25" upright handlebars or risers. Hand polished before being black electroplated or show chromed, it ships with 5/16-18 stainless steel socket cap hardware for mounting the gauges - "the 1 or 1.25" clamp size makes them a universal mounting point and problem solver for any number of custom cockpit challenges on M8 Softails" - especially when changing to taller handlebars. The stock wiring, digital display and indicator lights can be reused. Also seen here, Biltwell's hinged design straight or angled speed clamps also use removable shims to fit oversize 'Tyson' riserless handlebar and 'Murdock' risers to provide a rock-solid mount for most stock H-D and select aftermarket speedometer brackets. "The threaded hole on the leading edge of each clamp accepts a 5/16-18 t.p.i. allen cap bolt (included), which passes through the holes on the speedo bracket to create a strong, clean mounting point across the front of the handlebar." BILTWELL INC. Temecula, California, USA Tel: [phone] [email protected] www.biltwellinc.com around the uprights on 1 and 1.25" outer diameter uprights. "Our speed clamp's super-clean hinged design fits around the uprights on our standard or Wild 1 'Savage' 'Bars, Risers and Clamps Huntington Beach, California based handlebar specialist Wild 1 has these new 31.5" wide 'Savage' bars (in chrome or black) with 2.5" rise height. They are 1.25" at the clamping section and 1" at the grip, with a 6" pullback and flatter 20 degree wrist angle for improved control, comfort and "aggressive riding", they are said to "work great with our 3" 'Savage' risers and clamp." The risers have a massive 1.5" diameter and a 1.25" clamping section and come in 3" and 10" heights. Machined from T6061 billet aircraft grade aluminum, they are Diamond knurled with the bars and the risers drilled for internal wiring. Like all Chubbys 1.25" bars they have double wall tube construction and are available in show chrome, hot rod black www.AMDchampionship.com powder coat or raw finish. They fit most H-D models (except FLHT/C/U/K and FLHX.) WILD 1 INC. Huntington Beach, California, USA Tel: [phone] [email protected] www.wild1inc.com www.chubbyhandlebars.com AMERICAN MOTORCYCLE DEALER - AUGUST 2019 55