American Motorcycle Dealer AMD 241 August 2019 | Page 38
Custom Dynamics Additions
Youngsville, North Carolina based Custom Dynamics,
manufacturer of the ProBeam LED lights product line,
has these 'BAGZ' add on saddlebag lights. They use
automotive-grade LEDs and modern light pipe
design to adhere under the lip of the saddlebag lid
on OEM hard saddlebags.
With plug and play installation, each unit has 3 light
pipes that illuminate across the bag with 24 separate
LEDs to provide a full contrast brake light or
brake/turn signal (depending on model). They are
available with choice of chrome or gloss black
housing with a smoked or red lens, and come with
IP67 rated weatherproof quick disconnect to make
future removal of saddlebags quick and easy.
They are compatible with the company's Magic
Strobes brake light flasher to maximize visibility with
10 user selectable brake flash or strobe patterns (sold
separately).
Also seen here, Custom Dynamics' load balancing
SMART Triple Play module acts as a no-load, no-heat
load equalizer and converts rear 1156 turn signals
(models with a center taillight) to function as run,
brake, and turn with choice of 10 user selectable
built-in brake light strobe/flash patterns.
'SMART Triple Play' XG module
'BAGZ' saddlebag lights
Additional functions include selectable running light
intensities to match the running light brightness of
turn signals to center taillight, the ability to apply
brake strobe/flash patterns to center taillight only,
rear turns only, or rear turns and center taillight, and
a built in SMART function which allows normal turn
signal flash to override the brake strobe/flash when
simultaneously braking and turning.
The module fits '99-'03 XL, selected Dynas up to '11,
Softails to '10, Touring models to '13 (including
CVO), '06-'09 Street Glide (FLHX) and '97-'09 Road
Glide Standard (FLTR).
The plug and play module works with Custom
Dynamics ProBEAM red LED motorcycle turn signals
or stock incandescent bulbs (rear turns must be
converted to red color for DOT compliance), and is
backed by a 5 year manufacture warranty.
ProBEAM aluminum accessory mounting clamps
wrap around engine guards to provide hassle free
mounting of Custom Dynamics driving lights with a
5/16" mounting hole. They are available with 1.25"
inside diameter for mounting around 1.25" OEM
V-Factor Rocker Arms and Covers
V-Factor rocker arm cover assemblies are a
two-piece design, CNC machined from die
cast aluminum for high strength and lower
cost.
Developed to provide a high tech look while
reducing the high cost of a similar product
machined from billet aluminum, they can be
used on all years and models of the
Chrome plated rocker
cover set for all Evo
models
EVO
Evolution engine regardless of whether the
engine vents through the crankcase or the
cylinder heads.
The one way breather valve has been
upgraded from the OE umbrella type to a
much more efficient flapper type and is also
located higher in the cover. Installation of
covers on OE height and most comparably
sized engines can be performed without
removing the engine from the frame.
Sold as an assembly for front and rear heads
they have a six bolt top cover design "for an
improved sealing quality," and one piece
rocker arm supports for easy installation.
Extended height vent towers help eliminate
the oil mist carry over problem normally
Rocker arm covers
for Panhead
Rocker arm covers for
Shovelhead (all years)
ProBEAM aluminum accessory
mounting clamps
V-Factor OE replacement rear exhaust/front intake
and front exhaust/rear intake rocker arm
assemblies for Panheads from '48-'65 include
brass block, lower cast iron block, and matching
rocker arm for rear exhaust/front intake and front
exhaust/rear intake.
engine guards in choice of chrome or gloss black
finish.
Custom Dynamics has extended its luggage rack and
saddlebag rail LED light bar range with applications
for '09-'19 Electra Glide, Ultra, Road King/Road King
Special, Road Glide/Road Glide Ultra and Street Glide
models (including CVO) equipped with air wing
saddlebag rails, '09-'13 Tri Glide models equipped
with air wing trike fender rails and '05-'17 Softails
with air wing luggage rack.
These easy-install upgrades add an additional
running and brake light with super bright 5 mm LEDs
sealed behind a red or smoked lens for a seamless
and sleek look. The plug and play units are installed
with provided mounting hardware to the underside
of the OE air wing luggage racks/saddlebag rails.
CUSTOM DYNAMICS LLC
Youngsville, North Carolina, USA
Tel: 919 554 0949
[email protected]
www.customdynamics.com
associated with the head type venting
system; larger than OE vent valves are
incorporated into the rocker cover seal.
Silicon beaded lower gaskets and all
necessary mounting hardware are included.
They are available in chrome or polished for
Evo Big Twins '84-'99 and '86 and later
Sportsters.
Also seen here are stamped steel V-Factor
covers for '48-'65 Panheads (a choice of
screw kits, reinforcement kit and felt pad
sound deadener are also available) and CNC
machined replacement OE style rocker arm
covers for all Shovelhead years.- Spacers
included to adapt for '80 and later style
heads.
These V-Factor complete rocker arm
assemblies for Panheads include upper brass
block, lower cast iron block, and matching
rocker arm for rear exhaust/front intake and
front exhaust/rear intake. They fit Panheads
from '48-'65 to replace OE parts.
OE replacement V-Factor rocker arms are also
available for Shovelheads, Evo engines
(including XL) and Twin Cams - they come
with pre-installed bushings, sized and ready
to run.
MID-USA
Hazelwood, Missouri, USA
US direct: 314 595 5555
US toll free: 800 527 0501
Canada: 800 893 9261
www.mid-usa.com
www.mid-usa.ca
PARTS AND ACCESSORIES
38
www.AMDchampionship.com