American Motorcycle Dealer AMD 189 April 2015 | Page 42

Pickard Bagger options PICKARD USA is continuing to expand its product offerings for Bagger models with the introduction of raked fairing bracket packages. The new brackets have been designed to be used on ’13 and earlier custom Road Glides that are running 26in or 30in wheels. Once installed, the heavy gauge steel brackets correct the fairing angle after the bike’s neck has been raked. The brackets allow use of vented fairing lowers and eliminate the OEM fairing supports that are mounted to the engine guard. Mounting between the inner fairing mount and the turn signals, the Road Glide fairing support brackets can also be used to locate a mini amplifier or mount an air compressor. Moving to the rear of the bike, Pickard has 4.5in extended Top Shop saddlebags. Made from injection molded vinyl ester reinforced fiberglass, the bags are carpet lined and primed ready for paint. The 4.5in extension allows for additional storage space and the bags are supplied with a custom removable shelf. Options on Pickard’s bags include no exhaust cutout, or single or dual cut-outs. The factory lids and mounting hardware are re-used and Pickard offers billet aluminum latch covers as an additional option. PICKARD USA Richardson, Texas, USA Tel: 972 231 1298 [email protected] pickardusa.com Pro Pad ortho SuperLight Stainless insert for Series slip-on for Buell motorcycle seats PRO Pad is now making its ortho inserts available for installation into motorcycle seats. The company, which has been making gel inserts for motorcycle seats for over 15 years, has been using the ortho insert in its 1Diamond Mesh and Tech Series top pads for two years and the positive results have led to the ortho insert now being used in all of its top pads. The ortho insert has a comfort channel said to relieve pressure on the rider’s tailbone, which in turn reduces rider fatigue and shortens the recovery time on long rides. The insert is made of a soft, medical grade viscoelastic polymer that will not harden or bottom out. It also withstands extreme temperatures, from -60 degrees to +210 degrees. For installation, the gel can easily be trimmed to fit any motorcycle seat. PRO PAD INC Mooresville, North Carolina, USA Tel: 704 660 1084 [email protected] www.thepropad.com 42 AMERICAN MOTORCYCLE DEALER - APRIL 2015 SUPERTRAPP’S SuperLight Stainless Series slip-on mufflers for use on Buell models are a tunable, disc-based design said to offer a four percent increase in horsepower. The stainless steel muffler is supplied complete with fifteen 4in tuning discs and it fits ’99 - ’02 Buell Lightning, ’99 ’02 Buell M2 Cyclone, ’98 -’02 Buell S-3 / S3T Thunderbolt and ’99 S-1 Thunderbolt White Lightning models. SUPERTRAPP Cleveland, Ohio, USA Tel: 216 265 8400 [email protected] www.supertrapp.com Magnum Shielding ‘Designer’ handlebar installation kits MAGNUM Shielding's 'Designer' handlebar installation kits, which are available through Drag Specialties, are said to be the only complete kits available with matching braided cables and brake lines in a choice of Sterling Chromite II or Black Pearl. The company is making its kits available for most ABS and non-ABS models with 12in to 20in ape hanger style handlebars. Each kit includes throttle and idle cables (except ‘08-‘15 Dressers), clutch cable or hydraulic clutch line, front brake lines (which exceed DOT FMVSS-106 requirements), copper crush washers, hardware and correctly colored wiring extensions with OE-style connectors and shrink tube. The fittings with each kit are either chrome or black chrome, dependant on the finish on the braided lines. Kits for dual disc models include an all brazed manifold that is said to eliminate leaks, alignment problems and unattractive threaded connections. DRAG SPECIALTIES Janesville, Wisconsin, USA Tel: 608 758 1111 [email protected] www.dragspecialties.com www.AMDchampionship.com