American Motorcycle Dealer AMD 181 August 2014 | Page 33
Latest additions to
Motorcycle Storehouse range
MOTORCYCLE Storehouse is now stocking the MMB
Gen-2 Ultra Mini speedometers. This latest
speedo from MMB is just 48m in diameter and the
housing is 33mm deep, whereas the Gen-1 was
50mm deep. The electronically driven speedo is
available with black or white face in a 'Basic' or
'Target' design in kph or mph, and with a choice of
white, yellow, blue or red LED illumination.
The Gen-2 Ultra Mini speedometers come with
integrated LED lights in red warning, blue high beam,
gre en neutral and green turn signal. An extra large
waterproof LCD display is used to inform the rider on
switchable kph/mph distance, two trip counters, two
trip time counters, date, time, ambient temperature
in Celsius or Fahrenheit, battery voltage and fuel
reserve as a symbol.
Originally designed for use on ‘94-up H-D models
equipped with stock electronic transmission driven
speedometers, the Gen-2 can be used in many
custom applications since the speedometer can be
used with inductive and Hall-effect sensors with npn
output, Reed-sensors and induction sensors (VRS).
Calibration can be done manually by entering a
known number of sensor pulses or automatically by
riding a certain distance. Connectors that fit the rear
side of speedo are included along with a
comprehensive installation manual.
Among the Küryakyn range of products stocked
by Motorcycle Storehouse is the ECE approved 7in
LED headlamp unit. While the unit has previously
The latest MMB Ultra Mini speedometers uses a
smaller housing than previous versions
been available, it is only now being offered with ECEapproval and with the option of left-side drive for use
in the UK. Said to provide more light than a H4 bulb
while using less power, the light fits all FLHS, FLHX,
and FLHR (excluding 2014 FLHR and C, and FLHRSE),
‘11-‘14 FLD and all trike and Softail models with 7in
headlamps and standard connectors.
Motorcycle Storehouse has now also added the
Mueller internal throttle grip to its stock list. This
internal throttle uses four roller and two bearing
sleeves and is machined to the tightest tolerance to
create the smoothest action possible. Supplied with
a universal throttle cable with PTFE inner lining that
can even be run through the most extreme Z-bars,
without adverse effects to control smoothness, there
are two versions are available, one for use with metal
throttle grips and one closed for use with rubber
throttle grips to prevent the rubber contacting the
moving internals of the throttle.
MOTORCYCLE STOREHOUSE
Bedum, NETHERLANDS
Tel: +31 (0)50 303 9775
[email protected]
www.mcseurope.nl
The LED headlamp unit from Küryakyn is now
supplied by Motorcycle Storehouse with ECEapproval
A throttle cable with a
PTFE inner lining is
included with the Mueller
internal throttle
www.AMDchampionship.com
AMERICAN MOTORCYCLE DEALER - AUGUST 2014
33