American Motorcycle Dealer AMD 180 July 2014 | Page 50

Premium semi-synth 20W-50 DYNACYCLE Oil say that it guarantees that its high temperature/high shear viscosity premium semi-synthetic 20W-50 oil will reduce engine temperature by up to 30 degrees Fahrenheit compared to conventional oils, and up to 15 degrees Fahrenheit over full synthetic oils. The oil has been specifically designed and patented for air-cooled or oxygenated Harley type engines to extend engine life, but also to increase oil pressure and horsepower. The viscosity of all fluids varies with temperature. The usefulness of the viscosity of lubricants is greatest when the viscosity is measured at or near the conditions of shear rate and temperature that the lubricants will experience in service. The high temperature high shear test measures a lubricant’s viscosity under severe high temperature and shear conditions that resemble highly-loaded journal bearings in fired internal combustion engines. In order to prevent bearing wear, it is important for a lubricant to maintain its protective viscosity under severe operating conditions. Dynacycle oil is claimed to have one of the best high temperature/high shear viscosity numbers in the industry with a 6.12, which is better than many of the top selling motorcycle oils available. DYNACYCLE OIL Jamesburg, New Jersey, USA Tel: [phone] [email protected] www.dynacycleoil.com Lifetime warranty on improved Simplified Air Suspension CUSTOM Cycle Control Systems (CCCS) has announced a new lifetime warranty on all of the machined parts, as well as a three-year allencompassing warranty on its new SAS (Simplified Air System) air suspension. If anything happens to a customer’s SAS in the first three years of ownership the company will replace it with a reconditioned or new unit. The SAS is a complete unit with no separate compressor or hoses, it replaces the stock shocks of Softail models and just requires an on/off switch wiring directly to the battery. Once installed it allows the rider to raise and lower the rear end of the bike at the touch of a button. Air pressure can be added to improve ride quality during changing road conditions or while carrying added weight. Also improving the ride quality is a pre-set factory dampening valve. At approximately 150psi, the bike will be fully raised and the suspension will be resting on its piston bumpers at maximum ride height. After that the height will not change, but air pressure can be increased for improved riding during cornering or with a passenger. CUSTOM CYCLE CONTROL SYSTEMS Las Vegas, Nevada, USA Tel: [phone] [email protected] www.customcyclecontrols.com 50 AMERICAN MOTORCYCLE DEALER - JULY 2014 www.AMDchampionship.com