American Motorcycle Dealer AMD 180 July 2014 | Page 28
RCX-Celerator closed loop fuel
management system
Biltwell
‘Murdock’ risers
THE RCX-Celerator for ‘08-‘13 H-D Touring
models is claimed by RC Components to be
the best fuel management system available.
It is a fully closed loop system, which means
it does all the work needing no dyno tuning,
no programming and no downloads, just
plug in and ride.
This new design for the ‘08-‘13 H-D Touring
models features a two-plug harness that
makes installation fast and easy.
The RCX-Celerator works with the factory
ECM and sensors to automatically detect
and adjust for changes in load, temperature,
elevation and throttle position, so that the
bike will always be running at its best no
matter where or how it is used. Made in the
USA.
BILTWELL has created its Murdock riser for
riders who want to run high risers in
combination with flat handlebars. The
Murdock risers are being made in 6in, 8in
and 10in heights, and they feature
investment-cast steel top clamps and lower
threaded bases, which are connected by
two 1in 0.120in wall seamless 4130
chromoly tubes. The TIG welded risers are
then chromed or satin black plated. The
threaded bases on risers are on 3.5in
centers to fit most stock and aftermarket
H-D triple trees with removable bar clamps.
The bolt pattern on the Biltwell Murdock
riser’s one-piece handlebar clamp fits stock
H-D speedo and tach brackets.
Biltwell parts are distributed exclusively in
the USA through Drag Specialties/Parts
Unlimited.
RC Components' RCXCelerator closed closed
loop fuel management
system is now available PARTS AND ACCESSORIES
for '08-'113 Touring models
RC COMPONENTS
Bowling Green, Kentucky, USA
Tel: 270 842 6000
[email protected]
www.rccomponents.com
Lazer Star Lights
LAZER Star Lights has expanded its selection of
fitment options for Harley-Davidson models now
giving riders the option to install its range of Billet
lights in numerous configurations.
The mounting options now being offered for the
company’s Billet Lights series include a rigid mount
designed to upgrade factory rear and front signal
lights, and a pivot mount, which is standard on all
driving light kits, and offers four-way adjustment.
Both styles of mount can be used on 39mm, 41mm
or 49mm fork tube clamps or 1.25in engine guard
bar clamps.
The Lazer Star patented Diamond Base mates with
stock light bars on many H-D motorcycles and can
be used with any driving light or turn signal.
BILTWELL INC.
Temecula, California, USA
Tel: 951 699 1500
[email protected]
www.biltwellinc.com
The handlebar adaptor is the newest member of
the Billet Lights series, and allows mounting of Micro
B driving or signal lights to the bike’s handlebars,
utilizing the factory mounting point. This
configuration is only applicable to Harley-Davidson
Sportster, Dyna and Softail models.
Lazer Star offers its Billet lights, which are
machined from 6061 aluminum, in Bullet, Shorty,
Micro B and XS housings, and its driving lights are
available in 35-watt or 50-watt halogen bulbs, with
special orders of 75-watt. The signal lights are
available in single filament halogen or dual function
LED formats.
LAZER STAR LIGHTS
Paso Robles, California, USA
Tel: 805 226 8200
[email protected]
lazerstarlights.com
Scorpion Series ring gear and starter clutch pinion gear
BARNETT has expanded its Scorpion Series
of Harley-Davidson clutch components with
the introduction of both a 106-tooth
replacement ring gear and starter clutch
pinion gear for use on ‘06 Dyna and ‘07-‘14
Big Twin applications.
The new ring gear is made from hardened
8620 steel, which is finished with black
oxide, and installation instructions are
included.
Barnett’s new starter clutch pinion gear
features a 20 percent larger gear and rollers
28
AMERICAN MOTORCYCLE DEALER - JULY 2014
than the factory
replacement for added
strength and durability.
The ring gear and
pinion gear are sold
separately.
BARNETT CLUTCHES & CABLES
Ventura, California, USA
Tel: 805 642 9435
[email protected]
www.barnettclutches.com
www.AMDchampionship.com