American Motorcycle Dealer AMD 179 June 2014 | Page 50

W&W expands product range Chrome is one of the finish options on the RSD Misano stem nuts Pimpin Hose reinforced rubber oil and fuel lines are braided with a choice of brass or copper The RSD Misano preload fork adjusters offer up to 30mm of fork preload adjustment via a 5/16in Allen wrench Dennis Corso upsweep header pipes can be used to convert existing shotgun or 2-into-1 exhaust pipes to an upsweep style W&W Cycles continues to expand its range of reproduction parts for older H-D models with the introduction of the G&J Knobby clincher. The tires are a reproduction of a ‘20s clincher tire with authentic knob style thread. The tires, available in black or white, fit 20in clincher tube type rims with a metal valve in center and a width between 1.85in and 2.5in. Pimpin Hose has oil and fuel lines in reinforced rubber, which is braided in either copper or brass. Size options are 1/4in internal diameter and 7/16in outer, 5/16in inner and 3/4in outer, 3/8in inner and 11/16in outer. The Dennis Corso upsweep header pipes can be used to convert existing shotgun or 2-into-1 exhaust pipes to an upsweep style. The selection available through W&W includes pipes with saddle for the rear pipe and 2-into-1 style, as well as pipes without saddle for independent 2-into-2 exhausts. Designed for use on rigid framed Big Twins, the headers have a 3/4in diameter and can be ordered in a choice of chrome or black finishes. A second new exhaust option from W&W is the Bossley Reventon Racy exhaust system. Made for use on Sportsters, the stainless steel system includes 1-3/4in diameter headers and a 4in muffler. Two versions are available, for ’86-’03 XL models and ’04 onward models, with both being offered in a choice of polished or dull black paint finishes. Included in the Roland Sands Design product range carried by W&W Cycles are the Misano preload fork adjusters. They allow on-the-fly fork spring preload adjustment with the use of a 5/16in Allen wrench. Preload can be increased or decreased within a 30mm range to alter the bike’s handling characteristics for a softer or stiffer ride once the adjusters have been fitted in place of the OEM top fork caps. They are available for 39 and 49mm forks, and install with no need to remove forks or top triple tree from the bike. Also available as part of the Misano line of parts from RSD, W&W Cycles has billet aluminum stem nuts in a choice of black Contrast Cut, Black Ops or chrome to fit ’84 onwards FXST and FXDWG, ’06 onward Dyna, and ’11 onward FLD models. W&W Cycles is carrying G&J Knobby clincher tires, which are reproductions of a ’20s design W&W CYCLES Wuerzburg, GERMANY Tel: [phone] (01149 931 250 6116 from the US) [email protected] www.wwag.com The Bossley Reventon Racy exhaust system i