AMD 252 July 2020 American Motorcycle Dealer 252 July 2020 | Page 44
'Aggressor' and 'Hide Away'
Series Headers
Distributed exclusively by Drag Specialties, Pine
Island, Minnesota based Khrome Werks has a
number of updates for 2020, including the
'Aggressor' Series headers seen here.
Constructed from 16-gauge mild steel tubing, the
design incorporates a linear interconnect between
the cylinders to promote proper scavenging -
'Aggressor' Series headers
'Hide-Away' headers
'Buck50' ape hangers
Hardbody Antique Style Springer Options
"resulting in significantly improved torque
potential." The 18 mm and 12 mm O2 sensor bungs
are placed for easy access and the head pipes have
spherical port caps to ensure sealing at the head."
They include 220-degree 2.5" diameter heat shields
and are designed to work with stock sized M-8 slipons,
including Khrome Werks' own 4.5" HP+
mufflers. The 'Aggressor' Series headers are available
in show quality nickel chrome or OE black finishes.
Mounting hardware and new port gaskets are
included.
Khrome Werks' 'Hide-Away' headers fit 2017 and up
M-8 Touring models and fit directly under the factory
heat shields for a significantly reduced thermal
footprint. Spherical port caps ensure proper sealing
and 18 mm and 12 mm O2 bungs mean flexible
tuning.
They have a 2.5" collector, 1 3/4" 16-gauge
primaries and crossover; they mount with factory
hardware and are said by Khrome Werks to deliver
"increased performance potential and a superior
sound." An easy-install design, they fit with OEM or
slip-on OEM replacement mufflers on 2017 and up
Touring models. Coated with nickel chrome, they
include gasket seals, O2 bung plugs and crush
washers.
Also seen here, these 'Buck50' 1.5" diameter mitrecut
ape hangers are designed for "ultra-comfort and
sick style" and are stepped down to a 1 inch clamp
area for easy install. Available in chrome or gloss
black for 2008 and up Batwings.
All Khrome Werks products are made in the USA and
are covered by a lifetime warranty on structure and
finish.
KHROME WERKS
Pine Island, Minnesota, USA
Tel: 507 884 0483
[email protected]
www.khromewerks.com
New from Hazelwood, Missouri based Mid-
USA, these new Hardbody black and copper
antique style springers come fully
assembled with in-line top bracket without
built-in rake (0 degree rake).
The standard length springer (20" measured
from the bottom of lower tree to the axle
center) is comparable to the vintage FL
model fork length. The 1" outside diameter
steering stem is designed for Timken type
Springer shock kits
bearings - 1952-1981 K Model and Old-Stf
Sportster neck cup conversion kit separately
available.
The fork measures 8 3/4" between the cast
axle rockers and the kit includes a 3/4" O.D.
axle; the riser mounts are on 4 3/4" centers
and threaded 1/2-20; universal brake rod
mount is on the right rear leg for disc
brakes, 5/8" hole.
Hardbody OEM drum brake springer and
wide style springer replacement parts and
conversion kits, along with V-Factor
reproduction antique springer shocks and
Speedster in-line stem style springer
handlebars also available from Mid-USA's
extensive line of antique style, restoration
style and custom springer front ends.
MID-USA
Hazelwood, Missouri, USA
US direct: 314 595 5555
US toll free: 800 527 0501
Canada: 800 893 9261
www.mid-usa.com
www.mid-usa.ca
Black and
copper antique
style springers
for custom
applications
Speedster style
handlebars
44 AMERICAN MOTORCYCLE DEALER - JULY 2020
www.AMDchampionship.com