SPLIT-SYSTEM UNITS 38NZ/NF & 40NZ/NF
Electronic controls
CARRIERrtc basic & medium electronic control (standard)
-- CARRIERrtc basic :
-- CARRIERrtc medium :
models 90 to 182
models 200 to 360
Note: Optionally, the models 90 to 182 can incorporate the
CARRIERrtc medium version.
CARRIERrtc basic & medium control is an electronic module
with microprocessor comprised of a control board and a TCO
user terminal that ensures the following functions:
-- Selection of the operating mode:
•
HEATING
•
COOLING
•
AUTO
•
DEHUMIDIFICATION
•
FAN (no icon).
Modification of the setpoint.
Permanent control of the operating parameters.
View of the values measured by the sensors.
View of the alarms produced by means of codes.
Timing of the compressors.
Control of the compressor discharge temperature by
probe.
-- Control of the ambient temperature thanks to the
probe incorporated into TCO terminal. This probe can
be replaced by an return or ambient probe that would
be installed in the control board.
-- Control of the outlet temperature to improve thermal
comfort level of the installation.
• In cooling mode this control prevents excessively
significant drops in the ambient temperature.
• In heating mode, it prevent the stratification of the hot air
masses.
Defrosting management (in heat pump units).
Possibility of intelligent defrosting that reduces
energy consumption of the heat pump, by
adjusting the time between defrosting operations
to the actual needs of the unit.
Compensation of the setpoint based on the
outdoor temperature. This function prevents
thermal “shock” between the inside and outside
of the premises whilst at the same time provides
significant energy savings
Time schedule that reduces energy consumption,
adjusting the needs of air conditioning of the
building throughout the day.
TCO terminal has a schedule programmer with an
intuitive graphic interface that allows 6 time slots
to be chosen for each day of the week. A change
in the setpoint temperature or the disconnection
of the unit can be scheduled in these time slots
(according to the building occupancy).
■■ Optional functions:
-- Control of the auxiliary electrical heaters.
-- Proportional control of a hot water auxiliary coil.
-- Humidity control.
-- Anti-fire safety.
-- Operation during all seasons via the condensation and
evaporation pressure control.
-- Detection of clogged filters and air flow control.
-- Connection to a centralised technical management system
(BMS) for supervision (please see “Optional” chapter).
Optionally, this control can have a terminal for pGD1
maintenance that facilitates the initial scheduling of the
unit, the modification of the operating parameters and the
description of the alarms produced.
CONTROLS
-------
-- The following features improve the energy management
of the installation:
AIR TREATMENT
Available in two versions:
C
A
R
R
I
E
R
2
0
1
6
/
2
0
1
7
801