Construction of fish tank:
Components required:
To prepare you fish tank, the following list of components would be required
Outlet
63mm x 2” Adapter Socket (Female
Thread)
63mm Tee-Junction Solvent Socket
63mm 90° Slow Elbow Solvent Socket
2” Running Nipple
50mm Rubber Gasket
50mm PVC Lock Nuts
Venturi Inlet
25mm 90° Elbow Solvent Socket
40mm T-Junction Solvent Socket
32mm x 20mm Reducing Bush
32-25 x 20 Conical reducer
Waste / Drain
50 x 1½” Adapter Socket (Female
Thread)
50mm Ball Valve Single Union Solvent
Socket
50mm 90° Elbow Solvent Socket
50mm T-Junction Solvent Socket
1.5” Running Nipple
40mm PVC Lock Nuts
40mm Rubber Gasket
2
1
2
1
2
2 each
each
each
each
each
each
3 each
1
1
1 each
each
each
2 each
1
6
1
0.5
2
2 each
each
each
each
each
each
Fish Tank Opening on Top:
• Remove the two horizontal steel lengths
attached to the top surface of the IBC tank
holding the inner plastic container in place.
The steel lengths are fixed with 4 star
headed screws. Remove these four screws
using a star headed screwdriver.
• Mark a square with a permanent marker
on top of the IBC, 150mm from each side
of the tank.
• Take a grinder and cut the PVC linen or the
tank along these lines.
• Once removed, wash the inside of the
container thoroughly with soap (sunlight
liquid and warm water) and leave to dry for
24 hours.
AgriKultuur |AgriCulture
16