NEW COPPER ZONE HIT AT MUSHIMA NORTH
PROJECTS AND EXPLORATION •
Image by Natanaelginting on Magnific. com
NEW COPPER ZONE HIT AT MUSHIMA NORTH
Location: Zambia Phase: Exploration Resource: Polymetallic deposit
Tertiary Minerals plc has discovered a new shallow coppermineralised zone 900m west-southwest of its Discovery Zone at Target A1, Mushima North Project in Zambia, the company announced on 17 August 2026.
Preliminary portable X-Ray Fluorescence( pXRF) results from two scout holes drilled as part of the recently completed programme confirmed shallow copper, including 13m at 0.53 % Cu from 29m, within an area the company has named the Western Zone.
Mushima North lies in Zambia’ s prospective Iron-Oxide-Copper- Gold region, 28km east of the historic Kalengwa copper-silver mine, which is currently under redevelopment. The Discovery Zone hosts an Exploration Target of 15-30 million tonnes at 40 – 60g / t silver equivalent.
The company’ s managing director, Richard Belcher, said,“ We are excited to announce the pXRF results from the two scout drill holes drilled at the Western Zone, Target A1, which have intersected shallow copper mineralisation, including 13m at 0.53 % Cu from only 29m below the surface. These holes are 900m to the westsouthwest of the Discovery Zone and indicate the potential for additional mineralisation in a new zone well beyond the Exploration Target boundary at the Discovery Zone where we have recently completed infill drilling aimed at supporting the production of a Maiden Mineral Resource Estimate.”
The results continue to support the company’ s wider geological model and belief that the Mushima North Project has the potential to host a much larger mineralised system than has been delineated to date.
“ While the current drill programme is now complete, we expect substantial newsflow over the coming weeks. This will include the remaining pXRF results for copper and zinc from the last seven holes drilled, as well as the certified laboratory results from across the entire drill programme inclusive of silver analyses for which our expectations in the Discovery Zone are justifiably high,” explained Belcher.
He said the goal was to advance the project to produce a Mineral Resource Estimate before the end of 2026.
Drill results The two drill holes at the Western Zone, Target A1 were drilled approximately 225m north of a line of five shallow, exploratory Air Core holes drilled in Phase 1. These holes targeted the western part of the Target A1 copper-in-soil anomaly and intersected low-grade copper mineralisation. The new holes were positioned based on our current understanding of the mineralisation within the Exploration Target at the Discovery Zone and its surface expression within the regolith. The pXRF results suggest the mineralisation at the Western Zone is copper only, rather than silver-copper-zinc as intersected at the Discovery Zone but this has yet to be confirmed by certified laboratory analysis. pXRF results from the remaining seven holes drilled are imminent and include the last of the infill drilling of the current Exploration Target at the Discovery Zone as well as the first scout drill hole drilled at Target A2. The certified laboratory results will be announced on an on-going basis as they become available.
Drill programme A total of 39 holes( for 3 639m) Reverse Circulation drill holes were drilled as part of the Phase 4 drill programme. For the drilling at the Discovery Zone, holes were collared along a series of east-west drill lines spaced approximately 100m apart( north-south) and 50m apart along the east-west lines and drilled to vertical depths of up to 128m. This was the maximum depth capability of the drill rig under the drilling conditions, the higher-than-expected water table and resultant wet samples. Drilling was completed in two passes to allow the updating of the company’ s geological model as new data became available and to enable the programme to be more dynamic.
Sampling, analysis and QAQC Sampling from the drilling programme was undertaken at 1m intervals and two subsamples were collected from each interval using a riffle splitter: one for potential laboratory analysis, the other for future reference. Samples are being initially analysed on site using a pXRF analyser for copper, zinc and silver. Analysis protocol includes the averaging of two analyses per sample( unprepared sample analysed through a thin plastic sample bag) and the inclusion of Certified Reference Material, blanks and duplicate samples as part of an internal Quality Assurance procedure.
Given the nature of the unprepared sample and point analysis, this method is being used as a preliminary analytical technique to provide an approximate quantitative measure of copper and zinc grades. Samples from selected drill holes based on the initial pXRF results are being sent to the independent laboratory, ALS Global, located in South Africa, for analysis for a range of elements using a four-acid digest, method code ME-ICP61( including silver, copper, zinc, bismuth, antimony and gallium). QA samples will be inserted and monitored as part of the Quality Assurance Quality Control protocol.
Reported drill hole intersection thicknesses are downhole thicknesses and true thicknesses are unknown. Intersections are weighted averages on zinc( using a cut-off grade of 0.2 % Zn) or copper( using a cut-off grade of 0.1 % Cu) with up to 3m internal dilution.
Source: supplied by Tertiary Minerals
www. africanmining. co. za African Mining Publication African Mining African Mining • November 2026 • 13