African Mining February 2026 | Page 28

• HEALTH AND SAFETY
This study aims to establish a framework for the optimal implementation of the system in underground mines by providing guidelines for the optimal TTR locator system, comparing its performance under different environmental and geological conditions and determining how interference from electric equipment and metal obstructions affects signal reception.“ We first started by creating a guideline for the optimal system design. This was done by selecting the optimal oscillator for the transmitter, selecting the optimal antenna design, calculating the minimum usable frequency and selecting the optimal antenna size,” she said. amplifier and a modulator, where the location data is extracted from the wave and displayed on screen for the rescue team to track down the missing miners,” she said.
However, the crystal oscillator was found to be the best choice because of its high accuracy and, most importantly, its very high environmental stability, as underground mines are environmentally unstable. For the antenna selection, the directional and the omnidirectional antennas were considered. The directional antenna can only transmit signals within a 45-degree angle.
Background image by Freepik. com
“ To validate that this design actually works, its performance was tested in different environments. To further validate that this design can work, its performance was also tested under different underground accident scenarios. Starting with the system design, for the oscillator selection, multiple oscillators were considered,” she added.
According to Mathebula, the system merges a transmitter attached to the miner’ s cap and a hand-held receiver used by rescue teams, sending signals through rock to reveal exact locations, regardless of whether a miner can communicate or if the infrastructure is still intact.
“ For low-noise amplifiers the transmitter uses an oscillator to generate a carrier wave. This wave is passed into a modulator where location data is embedded onto the wave. The wave is then passed into the amplifier, where its signal is boosted. From the amplifier, it is passed into the transmitter ' s antenna. The antenna sends out the wave into different propagation media. The wave is then received by the receiver ' s antenna and then passed through a low-res
Meaning that as the angle between the transmitter and the receiver increases, the signal transmission power decreases. But for the omnidirectional antenna, which transmits signals within a 360-degree angle, the orientation does not affect signal transmission. For the antenna size, the radiation resistance was calculated, which represents the amount of energy that is being radiated instead of being stored in the near field, as well as adaptation to different geological conditions, with considerations for high conductivity rock, water content and nearby metal interference.
She said miners in gold mines could be located within 45 – 62m in a rockfall situation without the need for more infrared cameras in poor visibility cases.
The two-day event highlighted the importance of safety and health in mining, with other speakers sharing their professional input and expertise. For more information about studies and other innovations, visit SAIMM’ s website. •
26 • African Mining • February 2026 www. africanmining. co. za