CRADLE TO GRAVE •
pivot point on scissor lift pivot, caster or other moving application. For example, the timber scissor lift incorporates 33 bushings and each one operates under slightly different conditions, including load, movement or weight. Matching specific polymer formulations is critical to each requirement and ensures optimal performance throughout the system.
The long lifespan of the bearings with no measurable degradation after five years of hard service in this tough application has changed the way REV Designs engineers its equipment. Ricardo says the polymer bearings have become“ integral to nearly all new designs” due to their ruggedness, predictable performance and dramatically reduced maintenance requirements.
Where earlier designs relied on steel or stainless-steel bearings that demanded daily greasing and constant monitoring, the igus polymer solution has enabled REV to offer equipment with significantly longer service intervals and minimal maintenance. This has been particularly valuable in tough industries where stopping production to repair or lubricate lifting machinery can be extremely costly.
By partnering with igus and applying the correct polymer materials at every pivot point, the company has created some of the most reliable heavy-duty scissor lifts in South Africa, capable of operating in the harshest industrial environments.
Source: supplied by igus South Africa
The timber lift that led to the adoption of polymer bearings across all scissor lift designs of the company.
“ The igus polymer bearings have operated without lubrication or adjustment and without any sign of wear severe enough to warrant replacement. The scissor lifts themselves have also run trouble-free, reinforcing the success of the bearing choice and overall design. Our customers’ own maintenance teams have confirmed that there has“ never been a problem with the bushes, never a problem with the scissor lift, nor anything with the scissor lifts.
“ This kind of long-term reliability in a demanding environment has had a direct impact on our design philosophy. Today, all new scissor lifts as well as numerous other loading and lifting solutions produced by the company are standardised on igus polymer plain bearings and bushings,” says Ricardo.
He explains that bearings need to be exceptionally strong to handle the massive forces generated during heavy lifting. At the same time, they have to resist the ingress of debris that quickly seizes or damages metal-on-metal bearings. The sawmilling sector is a good case in point. It is notoriously harsh on mechanical systems with fine sawdust, moisture and abrasive debris constantly entering mechanical clearances, destroying traditional bearings and requiring frequent greasing. Cleaning joints to remove grease and buildup also releases contaminants into the environment and if left ungreased, the heavy loads and repetitive motion quickly accelerate wear.
Working closely with Juan-Eric Davidtz, igus’ s polymer bearing specialist, REV is able to identify the correct iglide materials for each
www. africanmining. co. za African Mining Publication African Mining African Mining • August 2026 • 81