African Mining August 2026 | Page 51

ELECTRA MINING AFRICA •

CURRENT RISKS IN LIFTING OPERATIONS WITHIN MINING

By Gert Oosthuizen, Association Development manager at Lifting Equipment Engineering Association of South Africa
Lifting operations in mining exist at the intersection of extreme loads, unforgiving environments and human decision-making. That combination makes them inherently highrisk and often underestimated.
Load-related risks A significant portion of lifting incidents can be traced back to basic but critical errors. Incorrect load weight estimation, misunderstood centres of gravity and poor rigging practices, such as using improper lifting points, remain common contributors to loads falling or being dropped.
These risks are enlarged by dynamic external forces. Wind, soft and uneven terrain and possible loads swinging introduce variables that can quickly turn a controlled routine lift into a high-risk event, regardless of the rigging or lifting plan. In mining, no lift is ever truly“ standard.”
Lifting equipment failure Mining environments accelerate wear and tear on lifting equipment. Dust, moisture and continuous heavy use degrade components faster than in a typical industrial environment. Yet inspection regimes often fail to adapt to these harsher conditions.
The SANS standards, ranging from SANS 500:2023( Manual Chain & Lever Hoists) to SANS 2972:2018( Lifting Tackle Inspection), clearly state that inspection frequencies must be altered and increased in demanding environments. Despite this, inspections are not always conducted with the rigour required.
Even more concerning is the neglect of pre-use inspections. Too often, these checks simply become a tick-box exercise rather than a meaningful safety control. When defects go unnoticed, failure becomes a matter of time, not chance. Inspecting the typical sling requires far more attention and experience than the average person allocates to the task. This comes with experience and experience is not what is always on offer at all sites. A training certificate, there is no lack of that, but the certificate does not perform the inspection.
Site-specific conditions Mining introduces unique environmental hazards that significantly increase lifting risk. Uneven and sometimes also soft terrain ground, pit edges, confined underground spaces and restricted access all create unstable lifting conditions.
In addition, the constant movement of heavy vehicles and machinery reduces visibility and increases the likelihood of unexpected hazards. Lifting in these environments requires far more than technical compliance. It demands situational awareness and careful rigging or lifting task planning.
Human factors Human factors remain one of the most influential contributors to lifting incidents. Inadequate or inferior training, declining competency standards and a shift toward“ compliance-driven” rather than“ competence-driven” training have weakened operational safety.
Magnific. com
Mining introduces unique environmental hazards that significantly increase lifting risk.
Training has, in many cases, become a formality, focused on“ accreditation” and certification rather than capability. Some of the most intense and best training is not unit standard-driven and can therefore not be driven via the“ accredited” system.
www. africanmining. co. za African Mining Publication African Mining African Mining • August 2026 • 49