Dwell
| 54
Condominiums
Bathroom exhaust
2
MGE 4
Supply Grille
19.-
$
The days of the traditional bath fan are
numbered!
Using the FLEX100H does away with the need
for a bathroom exhaust fan in those tight homes
that have 1-2 bathrooms that are continuously
ventilated at a low rate as recommended by
ASHRAE 62.2.
The FLEX 100H with its Turbo Boost mode can
exhaust air at a low rate from these bathrooms
and at the push of a button, boost the airflow to
high to ventilate for 20 minutes or so to "freshen
up" the room.
The savings are immediate, no costs involved
with installing a ceiling fan, all that is required is
a small grille.
No more exhausting air which you have spent
money heating or cooling, the FLEX 100H
reclaims most of the heat/cool, saving you
energy and money.
1. FLEX 100H / $948.Heat Recovery Ventilator
Up to 100 CFM of continuous balanced ventilation.
Turbo Touch (TM) features provides up to 50%
more intermittent ventilation. Integrated air
flow measurement and damper system for easy
balancing. Duct diameter (inlet/outlet): 5"
See page 54.
2. MGE 4 / $19.Supply Grille
An exhaust diffuser for installation on ceiling or
wall. It can also be used for supply air. The diffuser
has a lockable central cone which is rotated to adjust the pressure and consequently the air volume.
See page 196.
3. RTS 5 / $42.- (not shown)
Push Button Timer
The RTS5 is compatible with Fantech Flex 100H,
VHR70R, VHR100R and VHR150R. The push button
activates the system to run in continuous mode
for 20, 40 or 60 minutes, it then returns to the
predetermined setting. See page 196.
fantech