Play
| 200
Indoor pool
A Refreshing Choice
An indoor pool can be a lot of fun if ventilated
and dehumidified properly. The complex
environment needs constant care and
maintenance. Ventilation plays a significant role
in occupant comfort and asset protection.
Chemicals used to treat the pool water can build
up leading to possible respiratory problems for
some swimmers. Bringing in a supply of fresh air
and removing stale humid air can alleviate this
problem. Chemicals can also build up causing
structure corrosion diluting the pollution with
fresh air can protect the building.
Using a Fantech Heat Recovery Ventilator
provides an economical, energy saving solution
to pool ventilation and dehumidification in
climates where the air is dryer outside than
inside. Heat from the exhaust air is transferred to
the incoming cooler air raising the temperature
and lowering the load on the HVAC system.
The unit is designed to reduce the occurrence
of condensation in the indoor environment by
first operating in the recirculation mode, moving
air around the structure, keeping windows dry
and eliminating troublesome cold spots, then
switching to air exchange mode as needed.
For correct sizing of your pool HRV contact
Fantech Customer Support.
1. SHR 14105R / $4.295.Heat Recovery Ventilator
120V, 10.8A, 1296W, 1410 cfm, max Ps=2.0"
The commercial Heat Recovery Ventilation system
(HRV) is designed to supply air into a pool area,
while exhausting an equal amount of contaminated
air to the outside. The aluminum heat exchange
core transfers sensible energy between air steams
resulting in tempering of the supply air and reduced
loads on the HVAC system. See page 146.
2. MDEH 1 / $25Dehumidistat
2-wire low voltage dehumidistat control with rotary
dial. Just turn the dial to set the humidity level.
Multiple units can be used with any HRV’s.
fantech