476 6-4. Using the other interior features
3 Open the lid, and fully and securely insert the plug of the device into the power outlet.( �P. 476)
Stopping the use of the power outlet( 1500 W)
Follow the procedure described below: 1 Turn the connected devices off.
2 Press the“ AC 120 V” switch to turn the power outlet off.
3 Disconnect each plug from the power outlet.
4 Close the lid of the power outlet.
Connecting a device
n When connecting a device
Make sure to read the instruction manual which came with a device and observe warnings on the device.
Before connecting a device to the power outlet, make sure that the device is turned off. 1 Open the lid, and fully and securely insert the plug of the device into the power outlet.
Do not leave the plug halfway inserted.
In the following situations, use cable extension, etc. and connect the plug securely to the power outlet:
• When the plug of a device is too large to allow it to be inserted fully and securely into the power outlet.
• When the plug of a device is heavy, possibly causing it to come off the power outlet.
If the device to be used has a ground wire, use a conversion adapter available on the market and connect the ground wire to the ground terminal of the conversion adapter.
nPower outlet
lWith this power outlet, use devices which operate on 120
VAC and have a combined maximum power consumption of 1500 W or less. If a device is connected
and the power consumption is exceeded, a protection circuit may be activated and the power supply function may be stopped.
lSome of the devices that consume a large amount of power,
such as an electric grille, may require the exclusive use of the
power outlet. When such a device is connected, do not connect other device( s) to the power outlet.
lWhen multiple devices are connected, depending on the device, a connected device may not operate properly. For such a device, use exclusively the power outlet.
lWhen a power outlet is being used, depending on the device to be used, the current flow may be high and the initial peak wattage may exceed 1500 W. In this situation, the protection function may activate and stop the power supply function.
lWhen a power outlet is being used, depending on the device to