454 5-4. Using the driving support systems
n Area displayed on screen
lThe black parts around the vehicle icon are not displayed by the camera. Visually check those areas.
lAs the images are obtained from four cameras are processed and
displayed on the standard of a flat
road surface, see-through view, moving view, panoramic view
( including zoomed display), side
clearance view, and cornering view may be displayed as follows:
• Objects may look collapsed; thinner or bigger than usual.
• An object with a higher position
than the road surface may look further away than it actually is or may not appear at all.
• Tall objects may appear protruding from the non-displayed areas of the image.
lVariations in the brightness of the image may appear for every camera due to lighting conditions.
lThe displayed image may be misaligned due to inclination of the
vehicle body or change in vehicle height caused by the number of
passengers, vehicle load.
lIf the doors are not completely closed, the image and the guide lines may not be displayed correctly.
lThe positional relationship of the
road surface and objects with the vehicle icon displayed on
see-through view, moving view,
panoramic view( including zoomed display), side clearance
view, and cornering view may differ to the actual positions.
lLight from a back-lit license plate may appear on the screen.
lImages indicated by in the figure are a composite, and hence some areas may be difficult to see. n Wide front view
A Area displayed on the screen
B Objects not displayed on the screen
Areas close to both corners of the bumpers will not appear on the screen.
nDisplay range
lThe area covered by the camera is limited. Objects that are close to either corner of the bumper or under the bumper cannot be displayed on the screen.
lThe depth perception of the image displayed on the screen differs to