5-4. Using the driving support systems
399
NOTICE
• When the color or brightness of the road surface is uneven
• When a light is temporarily shined on the parking space( lights of another vehicle, security light, etc.)
• When the road surface around the parking space has the same repeating pattern
• When there is a low protrusion on the road surface near the
parking space
• When the parking space is on a slope
• When a camera has been splashed by hot or cold water and the lens has fogged up
• When a camera lens is dirty or covered with water droplets
• When accessories which obstruct the view of the camera are installed
If assistance is ended during registration, perform registration again.
lWhen registering a parking space to the memory function, if the road surface cannot be detected“ No available parking
space to register” will be displayed.
lWhen using the memory function, make sure to stop immediately in front of the stop position. Otherwise the parking space may not be able to be
detected correctly or assistance may not be provided to the point that the vehicle is fully parked. lDo not use the memory function if a camera has been subjected to a strong impact or images of the panoramic view monitor are misaligned.
lIf a camera has been replaced, as the installation angle of the
camera will have changed, it will be necessary to reregister parking spaces of the memory function.
Advanced Park cancelation / suspension
n Assistance will be canceled when
In situations such as the following, Advanced Park operation will be canceled. Firmly hold the steering wheel and depress the brake pedal to stop the vehicle.
As system operation has been canceled, begin the operation again or continue parking manually, using the steering wheel.
• The Advanced Park main switch is pushed
• The shift position has been changed to P
• The parking brake is engaged
• A door or the back door is opened
• The driver’ s seat belt is unfastened
• The outside rear view mirrors are folded
• The TRAC or VSC is turned off
5
Driving