242 5-2. Driving procedures
nated. Rotary shifter display: The current shift position is illuminated. When selecting the shift position, make sure that the shift position has been changed to the desired position by checking the shift position indicator provided on the instrument cluster.
C P position switch
Fully stop the vehicle and set the parking brake, and then press the P position switch. When the shift position is changed to P, the switch illuminates. Check that the shift position indicator shows P.
n Changing the shift position in each power switch mode
lThe shift position cannot be changed when the power switch is in ACC or off.
lWhen the power switch is in ON, if the“ READY” indicator is not illuminated, the shift position can
only be changed to N.
lWhen the“ READY” indicator is illuminated, the shift position can be changed from P to D, N, or R.
lWhen the“ READY” indicator is flashing, the shift position cannot be changed from P to any other
position, even if the rotary shifter is operated. Operate the rotary shifter again after the“ READY”
indicator changes from flashing to illuminated.
n Shifting the shift position from P to other positions
lWhile depressing the brake pedal firmly, operate the rotary shifter. If
the rotary shifter is operated without depressing the brake pedal, the buzzer will sound and the shifting operation will be disabled.
lWhen selecting the shift position, make sure that the shift position has been changed to the desired position by checking the shift position indicator provided on the instrument cluster.
nThe shift position cannot be changed when
In the following situations, a buzzer will sound to inform you that the shift
position cannot be changed. Use
the appropriate operation to attempt to change the shift position again.
lWhen attempting to change the shift position from P with the brake
pedal not depressed
lWhen attempting to change the shift position from P with the accelerator pedal depressed
lWhen attempting to change the
shift position from N while stopped or driving at an extremely low
speed with the brake pedal not depressed
lWhen attempting to change the
shift position from N while stopped or driving at an extremely low
speed with the accelerator pedal depressed
lWhen the P position switch is pressed while driving
When driving at an extremely low speed, the shift position may change to P.
nThe shift position automatically changes to N when
In the following situations, a buzzer will sound to inform you that the shift position has been changed to N. Use the appropriate operation to attempt to change the shift position again.
lWhen attempting to change the shift position to R while the vehicle is moving forward
When driving at a low speed, the shift position may change to R.