4-6. Favorite settings
207
Recording a driving position into memory button
1 Check that the shift position is in P.
2 Turn the power switch to ON.
3 Adjust the driver’ s seat and outside rear view mirrors to the desired positions.
4 While pressing the“ SET” button, or within 3 seconds after the“ SET” button is pressed, press button“ 1” or“ 2” until the buzzer sounds.
If the selected button has already been preset, the previously
recorded position will be overwritten.
WARNING n Seat adjustment caution Take care during seat adjustment so that the seat does not strike
the rear passenger or squeeze your body against the steering wheel.
Recalling a driving position
1 Check that the shift position is in P.
2 Turn the power switch to ON.
3 Press one of the buttons for the driving position you want to recall until the buzzer sounds.
4
Before driving n Seat position that can be memorized( �P. 181)
The adjusted positions other than the position adjusted by lumbar support switch can be recorded.
n In order to correctly use the driving position memory function
If a seat position is already in the furthest possible position and the seat is operated in the same direction, the recorded position may be slightly different when it is recalled. nTo stop the position recall operation part-way through
Perform any of the following operations:
lPress the“ SET” button. lPress button“ 1” or“ 2”. lOperate any of the seat adjustment switches.
nUsing the voice control system * *: If equipped
The following operations can be performed using the voice control system: