2-2. Charging
125
n If“ Charging Stopped Due to Pulled Charging Connector” is shown
Likely cause Correction procedure
AC charging connector is removed while AC charging
After the traction battery is fully charged, the AC charging connector is removed while the traction battery is being recharged again because
electricity-consuming functions * have been used and the remaining charge is now reduced.
The release button of the AC charging connector was pressed while AC charging
When the AC charging connector is removed while AC charging, charging stops. If you want to fully charge the traction battery, reconnect the AC charging connector.
When the release button is pressed while AC charging, charging stops. To continue charging, reconnect the AC charging connector.
*: Electricity is consumed when operating traction battery heater( �P. 88)
n If“ Charging Complete Limited Charge Due to Battery Temp” is shown
2
Electric Vehicle system
Likely cause
Charging was stopped to protect the traction battery as it continued to remain hot for a certain period of time.
Correction procedure
Allow the traction battery to cool down and perform charging again if the charging amount has not reached the desired amount.