2-2. Charging
115
5 Select“ Edit”. Using My Room Mode
6 From the list displayed on the screen, touch the preconditioning settings in which it is desired to change the registered contents.
• When changing the registered contents:
Change the settings to the desired settings by following the steps from step 5 of“ Registering“ Scheduled battery preconditioning””.
• When deleting the registered contents: Touch“ Delete”
A message appears to confirm the deletion.
Touch“ Delete” to delete the selected charging schedule.
When the charging cable is connected to the vehicle, electrical components such as the air conditioning system and audio system can be used by the power supply from an external power source.
Starting My Room Mode
1 Connect the charge cable to the vehicle to start charging. AC Charging: �P. 94 DC Charging: �P. 100
2 Turn the power switch to ON while charging.
My Room Mode settings is automatically displayed on the multimedia.
3 Select the“ Yes”.
My Room Mode is started and it is
possible to use the air conditioning system, audio system, etc.
Select“ No” when My Room Mode is not being used.
To disable My Room Mode, turn the power switch off.
My Room Mode will automatically be off when DC charging is completed.
nMeter display while charging
After turning the power switch to ON while charging, the power switch automatically turns off if My Room Mode is not selected within approximately 100 seconds.
2
Electric Vehicle system