106 2-2. Charging
n Charging schedule function
lThe charging schedule cannot be set while driving.
lA maximum of 15 charging schedules can be registered.
If the charging mode is set to“ Start-stop” and the start time and end time are set to the same time, charging will be performed for 24 hours from the start time.
The charging schedule function can not be used when using DC charging.
n To make sure that the charging schedule function operates correctly
Check the following items.
lThe multimedia screen displays the correct time and day of week
For details, refer to the“ MULTIME- DIA OWNER’ S MANUAL”.
lCheck that the power switch is turned off
lAfter registering the charging schedule, connect the AC charging connector
The charging start time is determined based on the charging schedule at the time that the AC charging connector was connected.
lConnect the AC charging connector before the start time
When the charging mode is set to“ Start”, if you connect the AC charging connector after the set start time, the next charging schedule will be referenced.
When the charging mode is“ Start and stop”, if you connect the AC charging connector after the start time, charging will start immediately and charging will be performed until the stop time.
lAfter connecting the AC charging connector, check that the charging
indicator of the charging port flashes( �P. 84)
lDo not use an socket that has a power cut off function( including a
charging schedule function)
Use an socket that constantly supplies electricity. For sockets where the power is cut off due to a charging schedule function, etc., charging may not be carried out according to plan if the power is cut off during the set time.
nWhen the AC charging connector remains connected to the
vehicle
lWhen the charging mode is set to“ Start”, even if multiple consecutive charging schedules are registered, the next charge will not be
carried out according to the charging schedule until the AC charging connector is removed
and reconnected after charging completes. Also, when the traction battery is fully charged, charging
according to the charging schedule will not be carried out.
lIf the charging stop time is reached before the traction battery is fully charged and the charging mode is set to“ Start and stop”, the nearest charging schedule after the stop time is updated as the next charging schedule, and charging is repeated until the battery is fully charged.