2-2. Charging
97 charging will be interrupted. you.
3 Close the charging port lid. nIf the AC charging connector cannot be unlocked
�P. 84 2 n When the outside temperature is low or high
The level shown on the SOC( State of Charge) gauge( �P. 138) may
drop slightly when the power switch is turned to ON, even if charging has been completed and the traction battery is fully charged. However, this does not indicate a malfunction.
n When stopping charging on the meter display
1 While the charging status is displayed on the multi-information display, press“ OK” of the meter
control switches.
2 Select“ Yes”. Charging will stop.
n When removing the AC charging connector
Press the release button to unlock the AC charging connector, and after making sure it is unlocked, pull the AC charging connector towards
NOTICE n After charging
After removing the AC charging connector from the charging inlet, make sure to close the charging port lid.
If the charging port lid is left open, water or foreign objects may enter the charging inlet, which could lead to vehicle damage.
Electric Vehicle system