8-2. Steps to take in an emergency
571
2 Remove the hose and take out the power plug from the compressor. securely to the bottle.
3 Connect the bottle to the compressor.
Insert and connect the bottle straight into the compressor as shown in the illustration, and check that the claws of the bottle are concealed in the holes.
5 Remove the valve cap from the valve of the punctured tire.
8
4 Connect the hose to the bottle.
As shown in the illustration, make sure the hose is connected
6 Extend the hose. Remove the air release cap from the hose.
You will use the air release cap again. Therefore keep it in a safe
When trouble arises