54 1-2. Child safety
WARNING
n When installing a booster seat
To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten
only. This could cause injury or discomfort to the child.( �P. 29)
Child restraint system fixed with a child restraint LATCH anchor
n Child restraint LATCH anchors
LATCH anchors are provided for the outboard rear seats. restraint can be removed, remove the head restraint.( �P. 180)
� With flexible lower attachments
3 Latch the hooks of the lower attachments onto the LATCH anchors. For owners in Canada: The symbol on a child restraint system indicates A the presence of a lower connector system. n When installing in the rear outboard seats
Install the child restraint system in accordance to the operation manual enclosed with the child restraint system. 1 Adjust the seat. If there is a gap between the child seat and the seatback, adjust the
seatback angle until good contact is achieved.
2 If the head restraint interferes with the child restraint system installation and the head
A Canada only