1-2. Child safety
51 remove the head restraint.( �P. 180) in lock mode. In lock mode, the belt cannot be extended.
1
3 Place the child restraint system on the seat facing the front of the vehicle.
6 While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place.
After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
For safety and security
4 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
5 Fully extend the shoulder belt and allow it to retract to put it
7 If the child restraint has a top tether strap, follow the child restraint manufacturer’ s operation manual regarding the installation, using the top tether strap to latch onto the top tether strap anchor.( �P. 56)
8 After installing the child restraint system, rock it back