5-4. Using the driving support systems
421 n Downhill Assist Control during“ X-MODE”
lIn SNOW / DIRT mode or D. SNOW / MUD mode, the downhill assist control can be set
to standby state. The operation indicator changes depending on
the operating status of the downhill assist control.
lWhen the system is not operating, the indicator turns on white.
n When Downhill Assist Control is not available when selecting
“ X-MODE”
In the following cases, the system does not operate.
lWhen SNOW / DIRT mode or D. SNOW / MUD mode is not selected
lWhen the shift position is in P lWhen the Grip control is operating
lWhen the brake system or EV system is malfunctioning
When using Grip control
With SNOW / DIRT mode or D. SNOW / MUD mode selected, press down on the Grip control switch.
At this time, the downhill assist control system indicator turns off and the Grip control indicator turns on.
When the vehicle is stopped, press the brake pedal firmly and operate the switch. The vehicle may start moving unintentionally on an incline.
n Set the speed of the Grip control
Press the Grip control switch up or down to set the desired speed( approximately 2 to 6 mph [ 2 to 10 km / h ]). The set speed is shown on the multi-information display.
A Increase Speed Decrease Speed Indicator Lights n Grip control Operations
During system operations, the Grip control indicator turns on green. If the Grip control indicator is white, release the brake pedal to activate the system.
While the system is operating, the accelerator pedal and brake pedal can be used to temporarily accelerate or decelerate. If operating the accelerator pedal or brake pedal is stopped, the speed will return to the set speed.
n When Grip control is released
• Press the“ X-MODE” Switch
5
Driving