5-4. Using the driving support systems
419
WARNING
n Conditions in which it may not function correctly
When driving on the following road surfaces, it may not be possible to maintain a constant speed of the vehicle, which may lead to
an unexpected accident. less than approximately 13 mph( 20 km / h).
When the drive mode is switched, the buzzer sounds. lExtremely steep inclines l Rough road surfaces
lSlippery road surfaces such as snowy roads and frozen road surfaces
System Components
A“ X-MODE” switch Grip control switch( �P. 421) Indicators
Selecting the Drive Mode
Press the“ X-MODE” switch repeatedly until the system switches to the desired driving mode while the vehicle is stopped or traveling at a speeds
1 Normal mode
Has a good balance of electrical consumption performance, quietness, and driving performance, and is suitable for driving in urban areas. 2 SNOW / DIRT mode
When the tires are likely to slip or slip on slippery roads such as snowy roads, gravel roads, etc., the tire spinning is reduced, making it easier to drive. At this time, the SNOW / DIRT mode indicator lights up in green on the meter. 3 D. SNOW / MUD mode
In special cases such as the tires being buried in deep snow or mud, the TRAC( Traction Control) function is temporarily canceled, and the tires are idled as needed to make it easier to start. At this time, the D. SNOW / MUD mode indicator lights up in green on
5
Driving