5-4. Using the driving support systems
405
• Tall objects may appear protruding from the non-displayed areas of the image.
lVariations in the brightness of the image may appear for every camera due to lighting conditions.
lThe displayed image may be misaligned due to inclination of the
vehicle body or change in vehicle height caused by the number of
passengers, vehicle load.
lIf the doors are not completely closed, the image and the guide
lines may not be displayed correctly.
lThe positional relationship of the road surface and objects with the
vehicle icon displayed on
see-through view, moving view, panoramic view( including
zoomed display), side clearance view, and cornering view may differ to the actual positions.
lLight from a back-lit license plate may appear on the screen.
lImages indicated by in the figure are a composite, and hence some areas may be difficult to
see. n Wide front view
A Area displayed on the screen
Objects not displayed on the screen
Areas close to both corners of the bumpers will not appear on the screen.
nDisplay range lThe area covered by the camera is limited. Objects that are close to
either corner of the bumper or under the bumper cannot be displayed on the screen.
lThe depth perception of the image displayed on the screen differs to
the actual distance.
lThe wide front view camera uses a special lens, so the depth perception of the image displayed on the screen differs to the actual distance.
5
Driving