282 5-4. Using the driving support systems
n Break suggestion function
This function is operable when all of the following conditions are met:
lThe vehicle speed is approximately 32 mph( 50 km / h) or more.
lThe lane width is approximately 9.8 ft.( 3 m) or more.
Depending on the condition of the vehicle and road surface, the break
suggestion function may not operate.
Changing LDA settings
• The LDA system can be enabled / disabled through a customize setting.( �P. 613)
• The settings of the LDA can be changed on the customize settings.( �P. 613)
• Vehicles with a driver monitor camera: When the system determines that the driver is tired, the lane departure warning function will operate at the“ Earlier” timing, regardless of the customized setting. Also, this setting will be kept until the power switch is turned off.
WARNING
n Situations in which the system may not operate properly
In the following situations, the system may not operate properly and the vehicle may depart from
its lane. Do not overly rely on these functions. The driver is
solely responsible for paying attention to their surroundings
and operating the steering wheel as necessary to ensure safety.
lWhen the boundary between the asphalt and grass, soil, etc., or structures, such as a curb, guardrail, etc. is not clear or straight
lWhen the vehicle is struck by a crosswind or the turbulence of other nearby vehicles
lSituations in which the lane may not be detected: �P. 255
lSituations in which the sensors may not operate properly: �P. 254
lSituations in which some or all of the functions of the system cannot operate: �P. 255
lWhen it is necessary to disable the system: �P. 249
Displays and system operation
The operating state of the lane departure alert function and steering assist operation of the lane departure prevention function are indicated.