240 5-3. Operating the lights and wipers
Turning on the high beam headlights
AHB( Automatic High Beam)
1 With the headlights on, push the lever away from you to turn on the high beams.
Pull the lever toward you to the center position to turn the high beams off. 2 Pull the lever toward you and release it to flash the high beams once.
You can flash the high beams with the headlights on or off.
The Automatic High Beam uses a front camera located on the upper portion of the windshield to detect the brightness of the lights of vehicles ahead, streetlights, etc., and automatically changes the head lights between the high beams and low beams.
WARNING n For safe use
Do not overly rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turning the high beams on or off manually if necessary.
n To prevent unintentional operation of the Automatic High Beam System
lWhen it is necessary to disable the system: �P. 249
Using the Automatic High Beam System
1 Press the Automatic High Beam switch.