224 5-2. Driving procedures
WARNING
n Stopping the EV system in an emergency
lIf you want to stop the EV system in an emergency while driving the vehicle, press and hold the power switch for more than
2 seconds, or press it briefly 3 times or more in succession.( �P. 542)
However, do not touch the power switch while driving
except in an emergency. Turning the EV system off while driving will not cause loss of steering or braking control, however, power assist to the steering will be lost. This will make it more difficult to steer smoothly, so you should pull over and stop the vehicle as soon as it is safe to do so.
lIf the power switch is operated while the vehicle is running, a warning message will be shown on the multi-information display and a buzzer sounds.
lWhen restarting the EV system after an emergency shutdown, press the power switch.
Changing power switch modes
Modes can be changed by pressing the power switch with the brake pedal released.( The mode changes each time the switch is pressed.)
A“ ACCESSORY”“ POWER ON”
1 OFF
The emergency flashers can be used.
2 ACC *
Some electrical components such as the audio system can be used.“ ACCESSORY” will be displayed on the meter. 3 ON
All electrical components can be used.“ POWER ON” will be displayed on the meter. *: ACC mode can be enabled / disabled on the customize menu.( �P. 612)
nWhen ACC customization is in off
lWith the power switch is turned off, the multimedia system can still be used for a certain time until the battery saving function starts operating.
lWhen the safe exit assist is operating, a buzzer will sound and a voice guidance will be given.