188 4-4. Adjusting the steering wheel and mirrors
can also be changed while using the digital mirror mode.
n Enabling / disabling the automatic anti-glare function( optical mirror mode)
The automatic anti-glare function in the optical mirror mode can be enabled / disabled. The setting can be changed in both the digital mirror mode and the optical mirror mode.
� When using the digital mirror mode
�P. 187
� When using the optical mirror mode
1 Press the menu button.
The setting display will be displayed.
5 seconds or more.
lIf the displayed image is adjusted, it may appear distorted. This is not a malfunction.
lIf the brightness of the Digital
inner mirror is set too high, it may cause eye strain. Adjust the Digital inner mirror to an appropriate
brightness. If your eyes become tired, change to optical mirror
mode.
lThe brightness of the Digital inner mirror will change automatically
according to the brightness of the area in front of your vehicle.
nTo prevent the light sensors from malfunctioning
To prevent the light sensors from malfunctioning, do not touch or cover them.
2 Press or to enable(“ ON”)/ disable(“ OFF”) the automatic anti-glare function.
The icons will disappear if a button is not operated for approximately 5 seconds or more.
n Adjusting the display( digital mirror mode)
lThe icons will disappear if a button is not operated for approximately
WARNING Observe the following precautions.
Failure to do so may result in death or serious injury.
n While driving
lDo not adjust the position of the Digital inner mirror or adjust the display settings while driving.
Stop the vehicle and operate the Digital inner mirror control switches. Failure to do so may cause a steering wheel operation error, resulting in an unexpected accident.